{"menu_hwnat":"Hardware Acceleration","hwnat":{"desc":"Hardware acceleration reduces the overall CPU load and speeds up traffic packet forwarding, but can conflict with some features.","tips":"When hardware acceleration is enabled, the following functions will not work properly: Client Speed and Traffic Statistics, Client Speed Limit."},"zerotier":{"desc":"$$$$ZeroTier$$$$ creates a secure, virtual peer to peer Ethernet network accessible from anywhere; it supports access to devices such as phones, PCs etc. You can use it to access your devices or LAN remotely.","first_use_tips":"ZeroTier connects to your virtual network using the Network ID, that you create on $$$$ZeroTier Central$$$$.","unauthorized_tips":"The device has been added to ZeroTier. Please go to $$$$ZeroTier Central$$$$ to authorize the device to connect to your virtual network.","authorized_tips":"The device is connected to your ZeroTier virtual network.","enable_nat_tips":"The device already allows ZeroTier clients to access resources on the WAN or LAN. You need to set up routing rules in $$$$ZeroTier Central$$$$ to allow client requests to be forwarded through the ZeroTier virtual network:","auto_nat_label":"Allow Remote Access LAN&WAN","auto_nat_tips":"If this option is enabled, resources inside the LAN subnet and WAN can be accessed through the ZeroTier virtual network.","current_ip_label":"Router Virtual IP","not_found_tips":"ZeroTier has not found the Network ID, please check the value entered.","allow_lan_label":"Allow Remote Access LAN","allow_wan_label":"Allow Remote Access WAN","allow_lan_tips":"If this option is enabled, the resources inside the device LAN will be able to be accessed via the ZeroTier virtual network.","allow_wan_tips":"If this option is enabled, the resources on the WAN side of the device will be able to be accessed via the ZeroTier virtual network."},"menu_logview":"Log","log":{"export_log_btn":"Export Log","system_log_title":"System Log","kernel_log_title":"Kernel Log","crash_log_title":"Crash Log","cloud_log_title":"Cloud Log","no_log":"No Log","remove_crash_log":"Remove Crash Log","save_crash_log":"Save Crash Log"},"ddns":{"desc":"You can enable Dynamic DNS (DDNS) for this router and access this router remotely. There will be a delay of up to ten minutes in the synchronisation of records between DNS servers. This may result in access via DDNS domains not being available immediately after you have just enabled or if your public IP has recently changed.","test":"DDNS Test","enable_http":"Enable HTTP Remote Access","enable_https":"Enable HTTPS Remote Access","enable_ssh":"Enable SSH Remote Access","read_and_agree":"I have read and agree","terms_service":"Terms of Service","privacy_policy":"Privacy Policy","detecting":"Detecting, please wait…","working":"Your DDNS service is working.","not_effective":"Your DDNS is not effective yet. Please try later.","enable_http_tip":"HTTP is a non-encrypted protocol. Please use with caution.","host_name":"Host Name","parsing_success_tips":"The DDNS domain has been correctly resolved to the public IP of this device.","parsing_error_tips":"The DNS record for this DDNS domain could not be found by the DNS server. Please check the Internet connection of the device.","parsing_warning_tips":"The IP address from DDNS domain resolution is not the same as the WAN IP of the device. You need an Internet Public IP address to use Dynamic DNS. If this router is behind NAT, you may need to set up port forwarding on your ISP router. If you have VPN Client enabled, please disabled \"Services from GL.iNet Use VPN\" in the global options.","parsing_label":"IP address from DDNS Domain Resolution","parsing_interface_title":"WAN Interface IP address","remote_access_tips":"If you want to access the device remotely, please $$$$Go to Security Page$$$$ to set up.","parsing_ip_warning_tips":"The IP address from DDNS domain resolution is not the same as the WAN IP of the device.","need_pubilc_ip_tips":"You need an Internet Public IP address to use Dynamic DNS.","sevices_warning_tips":"If you have VPN Client enabled, please disabled \"Services from GL.iNet Use VPN\" in the global options.","nat_warning_tips":"If this router is behind NAT, you may need to set up port forwarding on your ISP router.","use_desc":"You can enable Dynamic DNS (DDNS) for this router and access this router remotely.","enabled_tips":"There may be a delay of up to 10 minutes in record synchronization between DNS servers. This may cause you to be unable to access through the DDNS domain name immediately after you have just enabled it or your public IP has changed.","security_settings_btn":"Security Settings","security_settings_tips":"In \"System-Security\" Remote Access Control, you can modify two options to restrict remote access.","to_security_btn":"Go To Security"},"menu_dynamicdns":"Dynamic DNS","wireless":{"ssid":"Wi-Fi Name (SSID)","encryption":"Wi-Fi Security","key":"Wi-Fi Password","ssid_visibility":"SSID Visibility","mode":"Wi-Fi Mode","band_width":"Bandwidth","channel":"Channel","tx_power":"TX Power","shown":"Shown","hidden":"Hidden","max":"Max","high":"High","medium":"Medium","low":"Low","guest":"Guest","channel_optimization":"Channel Optimization","repeater_using_tips":"The entry cannot be modified when repeater is enabled.","enable":"Enable Wi-Fi","enable_dfs_tips":"If the router assigned with DFS channel: the channel availability check is required every time Wi-Fi is enabled, during this time the 5GHz signal will not be available for connections, this process takes $$$$. If the router detects that the radar is using the current channel, it will temporarily disconnect from the client and switch to another available channel; additionally, 5GHz Wi-Fi will be temporarily turned off whilst the router is scanning for available, nearby networks.","enable_dfs":"Allow DFS Channel","dsf_starting":"Checking for channel availability. This process will take $$$$. Please wait……","dsf_conflict":"5GHz Wi-Fi is temporarily unavailable because a radar is using the channel that the router is currently using.","channel_auto_dfs_tips":"When your bandwidth is set to 160 MHz, Wi-Fi will always use the DFS channel, even if you choose a non-DFS channel or the \"$$$$\" option.","channel_auto_tips":"When you select the \"$$$$\" option, Wi-Fi will not automatically switch to the DFS channel.","lan_guest_conflict_tips":"Guest Wi-Fi cannot be enabled because {guest} is in conflict with {lan}."},"menu_wireless":"Wireless","vpn":{"tunnel_ip":"Tunnel Address","client_vpn_private_ip":"Client Virtual IP","vpn_private_ip":"Virtual IP","public_ip":"Real IP","server_location":"Server Location","allowed_ip":"Allowed IPs","ovpn_desc":"OpenVPN is an open-source software application that implements virtual private network (OpenVPN) techniques to create secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. Please follow the steps below:","ovpn_step_tip1":"1. Generate a OpenVPN configuration file;","ovpn_step_tip2":"2. Modify the default configuration, then save;","ovpn_step_tip3":"3. Export the client configuration file to your client device;","ovpn_step_tip4":"4. Go to the VPN Dashboard page and start the VPN server.","ovpn_tips":"You don't have any OpenVPN configuration files yet. To get started, please generate one.","wg_desc":"WireGuard® is an extremely simple, fast and modern VPN that utilizes state-of-the-art cryptography. Please follow the steps below:","wg_step_tip1":"1. Generate a WireGuard® configuration file;","wg_step_tip2":"2. Add a peer configuration;","wg_step_tip3":"3. Copy peer information to the client;","wg_step_tip4":"4. Go to the VPN Dashboard page and start the VPN server.","wg_tips1":"You don't have any peer configuration yet. To get started, add a peer configuration.","client":"Client","server":"Server","modify_proxy_mode":"Modify Proxy Mode","autodetec":"Auto Detect","autodetec_desc":"The routing rules defined in each VPN client configuration file or issued by the VPN server will be used.","custom_route":"Customize Routing Rules","custom_route_desc":"You can manually configure routing rules for each VPN client instance.","type":"Type","config_file":"Configuration File","choose_config_file":"Select Configuration File","choose_config_file_tips":"You can switch the configuration file whilst the client is running; the process of switching the configuration file will not cause traffic leakage.","route_rule":"$$$$ Route Rule","edit_instance_config":"$$$$ Options","local_access":"Remote Access LAN","masq":"IP Masquerading","mtu_tips":"The MTU you set for the instance will overwrite the MTU item in the configuration file.","default_metric":"Default Metric","default_metric_tips":"In auto detect mode, the routing rules in the instance will write the routing table with the default metric. The smaller the metric value, the higher the priority of the routing rule.","log":"Log","client_starting":"The client is starting, please wait…","check_log":"View Log","server_addr":"Server Address","server_listen_port":"Server Listen Port","traffic_statistics":"Traffic Statistics","traffic":"Traffic","route_rule_tips":"In customize routes mode, the VPN client will ignore the configuration file and the routing configuration issued by the server. Whether the encrypted tunnel provided by the VPN is used when accessing any network segment will be determined by the routing rules you set manually.","add_route_rule":"Add Route Rule","dest_addr":"Target Address","gateway":"Gateway","metric":"Metric","operation":"Action","invalid_gateway":"Invalid gateway","invalid_mac":"Invalid MAC address","mac_has_been_added":"MAC has been added","invalid_metric":"Invalid metric","invalid_mtu":"Invalid MTU","server_starting":"Server is Starting, please wait…","add_new_group":"New Group","username":"Username","account":"Account","password":"Password","get_third":"Save and Continue","upload_tips":"Please visit $$$$ VPN on Router $$$$ to view OpenVPN compatible VPN service providers and learn about the benefits of using VPN.","upload_desc":"Follow your VPN service provider's guide, download the WireGuard configuration file, and import the configuration file to the router.","verifying":"Verifying…","passed_tips":"$$$$ valid configurations have been processed","passed":"Passed","rootcert_tips":"The root certificate file has been parsed:","needauth_tips":"$$$$ valid configuration files have been detected. Please enter the username and password. If these configurations use different passwords, you will need to enter the password individually for each configuration file:","needinfo_tips":"$$$$ valid configuration files need the askpass to be provided, Please ensure that these configurations all use the same askpass:","unpassed_tips":"The following $$$$ files are not valid configuration files. These will be discarded when the compressed package is confirmed:","unpass":"Failed","cert_key":"Certificate Key","edit":"Edit","account_title":"Account Information","auth_title":"OpenVPN Authentication Information","auth_desc":"The authentication information you supply here will override the authentication information provided in the configuration file.","upload_config_file":"Upload Configuration File","new_provider":"New Provider","modify_auth_info":"Modify Authentication Information","clear_all":"Clear All","update_third":"Update Servers","name":"Name","add_config":"Manually Add Configuration","edit_config_title":"Edit WireGuard Configuration","text_mode":"Text Mode","confing_item_mode":"Item Mode","ipv4_addr":"IPv4 Address","ipv4_subnet":"IPv4 Subnet","start_ip_addr":"Start IP Address","end_ip_addr":"End IP Address","use_ipv6":"Use IPv6","ipv6_addr":"IPv6 Address","ipv6_subnet":"IPv6 Subnet","private_key":"Private Key","listen_port":"Listen Port","public_key":"Public Key","peer_addr":"Endpoint","keep_alive":"Keepalive","use_preshare_key":"Use Preshared Key","preshare_key":"Preshared Key","server_title":"Server Configuration","ovpn_init_tips":"When generating the OpenVPN server configuration, the router will automatically generate some encrypted files (for example, the server root certificate) which are then used to protect your communications. If you are familiar with OpenVPN, you can also $$$$enter manually$$$$.","server_root_cert":"Server Root Certificate","upload":"Upload","dh_param":"Diffie Hellman Parameter","init_server":"Generate Configuration","run_mode":"Device Mode","communication_proto":"Protocol","server_communication_port":"Local Port","client_auth_mode":"Authentication Mode","server_cert":"Server Certificate","server_key":"Server Key","auth_algo":"Authentication Algorithm","cipher":"Encryption Algorithm","use_lzo":"Enable LZO Compression","hmac":"Enable TLS Authentication","ta":"TLS-Auth Authentication Key","client_each_other":"Client to Client","log_level":"Verbosity Level","client_use_vpn":"Client Use VPN to","client_auth_tips":"The router will automatically generate client and server certificates and keys; these will be written to the configuration file when it is generated.","export_config":"Export Client Configuration","use_ddns_export_tips":"Use DDNS domain to avoid the situation where a client cannot connect to the VPN service because of a change to the public IP address provided by your ISP. If you want to activate this function, please $$$$Enable DDNS$$$$ on your router.","use_ddns_domain":"Use DDNS Domain","download_config":"Download File","tun":"TUN","tap":"TAP","only_cert":"Certificate only","only_user":"Username/Password only","cert_and_user":"Username/Password and Certificate","access_lan_wan":"Access LAN and WAN","access_lan":"Access LAN Only","access_wan":"Access WAN Only","no_auth_tips":"Username/Password authentication is not enabled, the configured username and password will not be used.","add_new_user_title":"Add a New User","duplicate_user_name":"Username is already taken","relay_server":"Bounce Server","peer_ip":"Client IP","peer_config_title":"Client Configuration","qrcode":"QR Code","generate_peer_tips1":"Please download the WireGuard® app using Google Play or the App Store; then use the app to scan the QR code to connect to your server.","generate_peer_tips2":"Please copy the following configuration to your WireGuard client.","more_config":"Set More","config":"Configuration","guest_use_vpn":"Use VPN in Guest Network","kill_switch":"Block Non-VPN Traffic","kill_switch_tips":"Enable this option to block all traffic from client devices outside the VPN tunnel attempting to be sent outside of the VPN tunnel , preventing leaks from DNS settings, connection issues, or applications making IP requests. This overrides other VPN policies and rules.","use_vpn_only":"Allow Access WAN","filter_rule":"Filter Rules","policy_nav_title":"When a client accesses the network with your router$$$$how do you want the router to indicate whether the traffic is using a VPN encrypted tunnel?","to_set_rule":"Set Rules","use_other":"Use Other Methods to Filter","only_rule":"When Accessing Following Domain/IP","only_dev":"For Requests from Following Device","use_vpn":"Use VPN","no_use_vpn":"Do Not Use VPN","all_sites":"All Sites","all_dev":"All Clients","access_by_sites":"Differentiate by The Sites Visited","access_by_sites_desc":"In domain name/IP mode, you can set which websites to visit with or without VPN.","access_by_dev":"Differentiate by The Clients Accessing Network","access_by_dev_desc":"In MAC filtering mode, you can determine whether a client in your local area network can access the Internet through the VPN by specifying the MAC address of the client.","global_policy_btn":"Global Options","policy_base_on":"VPN Policy Based on the $$$$VLAN$$$$","enable_th":"Enable","domain_name_tips":"Using the domain name in the list will also cause any subdomains to be matched (for example: using google.com will also match mail.google.com and any other google.com subdomains).","traffic_use_vpn_label":"The Traffic from Client Devices","domain_exception":"Exception When Accessing Following Domain/IP","ie_without_vpn":"(i.e. without VPN)","ie_with_vpn":"(i.e. with VPN)","mac_exception":"Exception For Traffic from Following Device","strategy":"Policy Mode","strategy_label":"Policy Mode","route _mode":"Route Mode","base_on_web_tips":"In this mode, only the traffic of certain websites $$$$defined by IP address or domain name$$$$ can access the VPN. Only one VPN client instance can be activated.","base_on_device_tips":"In this mode, only the traffic of certain local client devices $$$$defined by MAC address$$$$ can access the VPN. Only one VPN client instance can be activated.","base_on_vlan_tips":"In this mode, $$$$only the traffic of certain VLAN$$$$ can access the VPN. Only one VPN client instance can be activated.","base_on_strategy":"Based on the $$$$VLAN$$$$","website_label":"Target Domain or IP","device_label":"Client Device","global_proxy_label":"Global Proxy","global_proxy_tips":"If the VPN is connected, all traffic will be routed through the VPN. Only one VPN client instance can be activated.","search_config_placeholder":"Search configuration file","set_up_now_btn":"Set Up Now","server_is_on":"The $$$$WireGuard$$$$ server is currently ON","server_is_off":"The $$$$OpenVPN$$$$ server is currently OFF","server_is_starting":"The $$$$OpenVPN$$$$ server is starting…","advanced_config_btn":"Advanced Configuration","users":"Users","profiles":"Profiles","set_key_btn":"Set Key Manually","invalid_dest_addr":"Invalid target address","set_key_manually_tips":"The router will automatically generate a key pair for you. If you are familiar with WireGuard and want to update the key pair or add a pre-shared key, you can provide these keys manually.","wgserver_peer_list_desc":"Each client device that connects to the WireGuard server requires a unique peer configuration. You need to create a separate configuration for each client device; each configuration must specify a unique client IP.","has_auth_tips":"Username/password verification is enabled. Client devices will require username/password from the list to connect to the OpenVPN server.","add_new_btn":"Add New","peer_deprecated_tips":"The configuration of the client peer is invalid because of a change in the server configuration. Please create a new peer configuration for your device.","askpass_label":"Askpass","advanced_configuration_tips":"If you are familiar with OpenVPN, you can also modify advanced configuration settings manually.","users_empty_tips":"The user list is empty, you must add at least one user to connect to OpenVPN server.","use_client_tips":"Prefer using $$$$other VPN service providers$$$$ or $$$$customizing your own VPN server$$$$ ? Create a new group to add your configuration files.","choose_a_server_title":"Select $$$$VPN$$$$ Servers","loaction_label":"Location","loaction_label_tips":"The router will only retrieve configuration profiles for servers located in the regions you choose. The more regions you choose, the longer it will take to get the profiles.","previous _step_btn":"Back","next_step_btn":"Next","add_config_btn":"Add Configuration","upload_file_btn":"Upload File","manual_inp_btn":"Manual Input","wg_revoke_key_tips":"Failed to generate a WireGuard key. You can only have up to five keys at the same time per Mullvad account. Please go to $$$$Mullvad$$$$ to revoke a key.","local_access_tips":"If this option is enabled, resources inside the LAN subnet can be accessed through the VPN tunnel.","masq_tips":"If this option is enabled, When clients devices on LAN send their IP packets, the router replaces the source IP address with its own address and then forwards it to the VPN tunnel.","use_vpn_only_tips":"If this option is enabled, while the VPN is connected, client devices will still be able to access WAN services, e.g. accessing your printer, NAS etc. in the upper subnet.","disable_vpn_for_services":"Services from GL.iNet Use VPN","view_status":"View Status","no_internet_msg":"No Internet Connection!","client_using_tips":"Currently in use","client_conneting_tips":"Connecting…","client_conneted_tips":"Connected","setup_guide":"Setup Guide","location_max_pre_label":"Max of Per Location","location_max_pre_placeholder":"No limit","use_vpn_label":"with VPN","no_use_vpn_label":"without VPN","disable_vpn_for_services_tips":"If this option is enabled, GooodCloud, DDNS, and rtty services will use VPN tunnels to send packets. Please note that normally, these services need to use the real IP address of the device, otherwise operations may fail.","client_count":"No Clients | 1 Client | {count} Clients","client_dialog_title":"Clients Status","configuration":"Configuration","nordvpn_setup_guide":"It is service credentials of NordVPN. If you don't know how to get it, please see $$$$Setup Guide$$$$.","third_lead_tips":"Request the VPN configuration file from your VPN service provider.","add_manually_btn":"Add Manually","following_domain_label":"Accessing Following Domain/IP","following_mac_label":"Traffic from Following Device","domain_required_tips":"Using the current list, you must add a domain name or IP","mac_required_tips":"Using the current list, you must add a device","enable_vpn_cascading":"Enable VPN Cascading","enable_vpn_cascading_tips":"If this option is enabled, when both VPN server and VPN Client are running on this router, clients connected to the VPN server will also be routed to the VPN client tunnel.","auth_conflict_tips":"Configuration files in the same group must use the same authentication method. Please upload configuration files from different providers to separate groups.","file_oversize_tips":"The uploaded compressed file cannot contain more than 1,000 configuration files.","unzip_fail_msg":"Failed to unzip the file. Please check the file and upload again.","online_count":"{count} Online","block_traffic_domain_filter_warning":"The $$$$ option is enabled and the domain in the list cannot be resolved. It may not be valid.","rootcert_missing_tips":"The certificate is missing; Please add a certificate before continuing.","rootcert_duplicate_tips":"Certificate File Detected, Please Rebuild the Group.","azirevpn_account_limit_tips":"An AzireVPN account may only be used on 10 devices at the same time. You have reached the maximum number of devices for your account, please go to $$$$AzireVPN$$$$, delete any devices that you are not using and try again.","remvove_public_key_label":"Delete public key and private key at the same time","wgclient_clear_account_warning":"Are you sure you want to delete the account credential, associated public key , private key and configuration files in the router?","ovpnclient_clear_account_warning":"Are you sure you want to delete this account and profile inside the router ?","needauth_needinfo_tips":"$$$$ valid configuration files need the username, password and the askpass to be provided, Please ensure that these configurations all use the same authentication information:","del_account_btn":"Delete Account Information","ovpnclinet_taps2s_disable_tips":"When this feature is enabled, functions such as {feature} cannot be used.","ovpnclient_tap_s2s_close_tips":"When this feature is turned off, the OpenVPN client reverts to its original IP address.","ovpnclient_tap_s2s_global_proxy_tips":"TAP-S2S only works with Global Proxy Mode, it will adjust automatically with OpenVPN on.","ovpnclient_tap_s2s_ip_tips":"The IP address of the OpenVPN client may change.","client_each_other_tips":"This is VPN Client to VPN Client, not Site to Site.","account_service_credentials_title":"Service Credentials","generate_peer_falied_msg":"Failed to generate client ip","domain_err_tips":"Incorrect formatting, please change manually or $$$$one-click processing$$$$"},"menu_wgserver":"WireGuard Server","menu_ovpnserver":"OpenVPN Server","menu_wgclient":"WireGuard Client","menu_ovpnclient":"OpenVPN Client","menu_vpndashboard":"VPN Dashboard","adguardhome":{"desc":"AdGuard Home is network-wide software that blocks ads and tracking. Once set up, it will cover ALL the devices on your home network, there is no need for any additional client-side software. This page gets statistics through the API provided by AdGuard Home. When AdGuard Home is enabled, the router will force the use of DNS servers provided by AdGuard Home.","tips":"Please go to the $$$$Settings Page$$$$ to perform advanced configuration of Adguard Home.","top_queried_domain":"Top queried domains","top_blocked_domain":"Top blocked domains","dns_querie_title":"DNS Queries","blocked_filtering_title":"Blocked by Filters","replaced_safebrowsing_title":"Blocked malware/phishing","replaced_parental_title":"Blocked adult websites","for_last_one_day":"In the last 24 hours","for_last_days":"In the last $$$$ days","not_disabled_dns_msg":"No other DNS is disabled","domain_th":"Domain","request_th":"Requests Count","no_data":"No Data","process_req_label":"AdGuard Home Handle Client Requests","process_req_tips":"If this option is enabled, DNS queries from client devices will be handled directly by AdGuard Home. AdGuard Home will show DNS query logs by clients, but this will cause VPN policies based on domain not to work."},"core":{"protocol":"Protocol","ip":"IP Address","ipv6":"IPv6 Address","gateway":"Gateway","dns":"DNS Server","netmask":"Netmask","username":"Username","password":"Password","ssid":"SSID","channel":"Channel","required":"Required","optional":"Optional","modify":"Modify","cancel":"Cancel","apply":"Apply","install":"install","connect":"Connect","disconnect":"Disconnect","abort":"Abort","caution":"Caution","no":"No","yes":"Yes","close":"Close","add":"Add","delete":"Delete","delete_all":"Delete All","submit":"Submit","setting":"Setting","reset":"Reset","delete_caution":"Are you sure you want to delete the entry?","delete_all_caution":"Are you sure you want to delete all entries?","clear_all_caution":"Are you sure you want to clear all?","password_tips":"Minimum $$$$ characters and maximum $$$$ characters","allow_password_tips":"Letters (case sensitive), numbers and symbols $$$$ are allowed","security_password_tips":"At least two of uppercase letters, lowercase letters, numbers, and symbols are required","please_choose":"Please Choose","retry":"Retry","disable":"Disable","not_allow_weak":"Prevent Weak Password","use_weak_tips":"Weak passwords are easily guessable and also expose your network to potential brute-force attacks.","back":"Back","download":"Download","copy":"Copy","next":"Next","options":"Options","admin_panel":"Admin Panel","refresh":"Refresh","start":"Start","stop":"Stop","type":"Type","enable":"Enable","port":"Port","action":"Action","continue":"Continue","router_time":"Router Time","learn_more":"Learn More","auto":"Auto","edit":"Edit","characters_hint":"$$$$ characters","maximum_byte_tips":"Maximum {count} bytes","begin_not_allow_tips":"Cannot start with any of the characters {char}","not_allow_use_tips":"the characters {char} are not allowed","has_been_used_tips":"Do not allow the same {label}","view":"View","description":"Description","all_select_btn":"Select All","select_none_btn":"Unselect All","blacklist":"Blocklist","mode":"Mode","advanced":"Advanced","current":"Current","whitelist":"Allowlist","drag_sort":"Drag Sort","select_btn":"Select","toggle_btn":"To Switch","confirm":"Confirm","save_btn":"Save","name":"Name","band":"Band","lock":"Lock","unlock":"Unlock","view_less":"View Less","view_more":"View More","debug":"Debug","send":"Send","upload":"Upload","global_options":"Global Options","interval_time":"Interval Time","low":"Low","medium":"Medium","high":"High","custom":"Customize","local":"Local","clear":"Clear","setting_instructions":"Setup Guide","pre_set_up":"Pre-Set Up","verify_btn":"Verify","view_details_btn":"View Details","idx_label":"index","update":"Update","incorrect_formate_tips":"Incorrect formatting, please change manually or {action}","one_click_process_btn":"one-click processing","tips_ttitle":"Tips","click here_btn":"Click Here"},"msg":{"access_denied":"Invalid user, permission denied or not logged in!","success":"Applied!","operation_not_finished":"Please wait until the current operation has finished.","getting":"Getting, please wait…","being_process":"Processing, please wait…","installing":"Installing, please wait…","uninstalling":"Uninstalling, please wait…","unknown_err":"Unknown error occurred. Please check the network environment or reboot the device.","interface_timeout":"Operation timed out. Please check the network environment or reboot the device.","processing":"Processing...","please_note":"Please note:","port_occupied":"{name} port occupied"},"date":{"day":"day(s)","sunday":"Su | Sunday","monday":"Mo | Monday","tuesday":"Tu | Tuesday","wednesday":"We | Wednesday","thursday":"Th | Thursday","friday":"Fr | Friday","saturday":"Sa | Saturday","second":"{count} second | {count} seconds","min":"{count} Minute | {count} Minutes","hour":"{count} Hour | {count} Hours","for_last_time":"Last {time}","ms":"ms"},"internet":{"connected":"Connected","lan_ip_tips":"LAN subnet is in conflict with the WAN subnet, Please $$$$Change LAN Subnet$$$$ to a different address.","getting":"Getting…","connecting":"Connecting…","guest_ip_tips":"Guest subnet is in conflict with the WAN subnet, Please $$$$Change Guest Subnet$$$$ to a different address.","up_not_online_tips":"The interface is connected, but the Internet can't be accessed with $$$$ protocol.","offline_tips":"The interface is connected, but the Internet can't be accessed.","band_width":"Bandwidth","unlocked":"Unlocked","locked":"Locked","frequency":"Frequency","server":"Server","client":"Client","enabled":"Enabled","disabled":"Disabled","ttl_tips":"TTL (Time To Live) sets the maximum time for packets to survive in the network, and is filled in according to the requirements of the operator.","hl_tips":"In IPv6, the HL (Hop Limit) field is used to limit the number of transmission hops of data packets in the network, which is equivalent to the TTL in IPv4.","net_trouble_guide_link":"Network Troubleshooting Guide","wan_label":"WAN Port","lan_label":"LAN Port","wan_lan_label":"WAN/LAN Port","lan1_label":"LAN 1 Port","mac_addr_label":"MAC Address","mac_real_label":"Factory","clone_label":"Clone","random_btn":"Random","current_client_label":"Current Client","disguise_mac_label":"Camouflaged MAC address","random_mac_label":"Randomized MAC address","clone_mac_label":"Cloned MAC address","mac_format_tips":"the least significant bit of the first octet is not allowed set to 1 (i.e. the second hexadecimal digit is not allowed odd).","mtu_general_tips":"If you set a value higher/lower than the supported range of the device, the device uses the supported maximum/minimum value.","mtu_ipv6_warning_tips":"IPv6 cannot work when MTU is lower than 1280."},"upload":{"select_or_drag":"Select a file or drag it here","file_include":"File types include","success":"Upload successful","reupload":"Re-upload file","firmware_format_error":"Incorrect firmware format!","error":"Failed to upload file.","format_error":"Data format error!","too_large_tips":"The uploaded file is too big, please upload a file that is less than $$$$ bytes.","lass_than_tips":"(Less than $$$$)"},"system":{"battery_err_tips":"The system does not detect the battery module, check the power connection or battery for damage.","limit_tips":"Data must not exceed {count} entries.","feature_unusable_tips":"This feature does not work because {feature} is enabled.","no_internet_base_tips":"Please check your internet environment and try again."},"rs485":{"serial_port_setting_title":"Serial Port Settings","serial_port_label":"Serial Port","baud_rate_label":"Baud Rate","parity_bit_label":"Parity Bit","data_bit_label":"Data Bit","stop_bit_label":"Stop Bit","total_timeout_label":"Total Timeout","debug_function_label":"Debug Function","common_label":"Common","custom_label":"Customized","dev_addr_label":"Device Address","func_code_label":"Function Code","command_label":"Command","data_label":"Data","payload_label":"Payload","quantity_coils_label":"Quantity of Coils","quantity_inputs_label":"Quantity of Inputs","quantity_registers_label":"Quantity of Registers","quantity_write_label":"Quantity of Write","forward_log_title":"Forward Log","forward_log_tips":"The device only saves logs for the last 3 days. Logs are lost after a reboot.","forward_to_network_title":"Forward To Network","parse_method_label":"Parse Method","parse_method_tips":"This option determines how the device parses bytes from the network.","parse_binary_tips":"The \"Binary\" method forwards the raw binary data directly, e.g. the string \"5F7D\" from the network will be forwarded to the serial port with its ACSII code 0x35463744.","parse_hexstr_tips":"The \"Hex String\" method forwards the data as a Hex string, e.g. the string \"5F7D\" from the network will be parsed as 0x5F7D and then forwarded to the serial port.","parse_method_response_tips":"The response from the serial port will be sent to the network using the corresponding method.","server_addr_label":"Server Address","server_port_label":"Server Port","local_port_label":"Local Port","timeout_label":"Timeout","encryption_mode_label":"Encryption Mode","one_way_label":"One-way","two_ways_label":"Two-ways","ca_cert_label":"CA Certificate","client_cert_label":"Client Certificate","client_key_label":"Client Private Key","password_key_label":"Password of Key","command_tips":"The gateway will subscribe to the topic to receive control commands issued by the platform.","response_label":"Response","response_tips":"The gateway will use the topic to send the command's reception or execution result in response to the control.","qos_level_label":"QoS Level","keep_alive_interval_label":"Keep Alive Interval","topic_label":"Topic","tcps_running_tips":"TCP Server is running.","tcps_starting_tips":"TCP Server is starting...","tcpc_connected_tips":"TCP Client is connected.","tcpc_connecting_tips":"TCP Client is connecting...","udp_running_tips":"UDP is running.","udp_starting_tips":"UDP is starting...","mqtt_connected_tips":"MQTT connected.","mqtt_connecting_tips":"MQTT is connecting...","target_client_label":"Target Client","target_addr_label":"Target Address","target_port_label":"Target Port","write_status_label":"Write Status","write_data_label":"Write Data","starting_data_addr_label":"Starting Data Address","device_busy_msg":"{code}, the serial number set by the serial port is occupied."},"btnsettings":{"fun_label":"Toggle Button Function","no_config_tips":"The toggle button will not take effect if $$$$ client configuration is not added.","no_func_babel":"No Function","startup_tips":"Note: After the device is rebooted, {func} will be enabled if the Toggle Button is on, otherwise it will be disabled.","auto_sync_tips":"Is {func} enabled/disabled immediately depending on the state of the Toggle Button?","vpn_client_tips":"You need to set the {vpnType} configuration in {meunKey} for the toggle switch to work."},"menu_btnsettings":"Toggle Button Settings","igmp":{"desc":"IGMP Snooping listens and extracts information from the IGMP protocol package, establishes and maintains the layer 2 multicast forwarding publication, and then forwards the multicast group data to any host that joins the multicast group, whilst other hosts cannot receive the multicast group data.","note":"IGMPv3 is compatible with v1 and v2. Use v3 by default, and switch if you experience a problem.","version":"Version"},"macclone":{"desc":"When you connect to a public network(e.g., hotel/mall), use a random MAC address if you do not want the network administrator to know your real MAC address or to limit your access to the Internet based on it.","tips":"If your hotel or other business location's network requires authentication, you may need to use the MAC cloning.","factory_default_label":"Factory Default","clone_label":"Clone","manual_label":"Manual","mode_label":"Mode","current_client_label":"Current Client","random_btn":"Random","no_mac_tips":"Generated when the interface is enabled","current_interface_as_lan_tips":"The current interface is a LAN port. The configuration will take effect when it is switched to a WAN port."},"menu_macclone":"MAC Address","menu_overview":"Overview","overview":{"batter_level_label":"Battery Level","temperature_label":"Temperature","charge_cnt_label":"Charge Cycle","cpu_status_title":"CPU Average Load","fan":"Fan","memory_title":"Memory Usage","flash_title":"Flash","total":"Total","sys_use_label":"System Used","app_use_label":"Apps Used","availabel_label":"Available","sys_info_title":"System Info","up_time_label":"Up Time","days":"Days","hours":"Hours","mins":"Minutes","hostname_label":"Hostname","model_label":"Model","arch_label":"Architecture","openwrt_ver_label":"OpenWrt Version","ker_ver_label":"Kernel Version","schedule_on_label":"Schedule On","schedule_off_label":"Schedule Off","led_not_set_tips":"The LED time has not been set.","external_storage_title":"External Storage","tflash":"T-Flash","usb_disk":"USB Disk","free_of":"$$$$ free of $$$$","no_data":"No Data","memory_tips":"The memory shown is the memory available to the Linux system. The total memory is less than the physical memory because some of it is allocated to the Wi-Fi subsystem or other boot areas.","fan_setting_tips":"CPU temperature threshold for fan start is $$$$ ~ $$$$ .","temperature_threshold_label":"Temperature Threshold","temperature_threshold_warning":"Set to this threshold, the fan may always be running.","fan_setting_title":"Fan Settings","memory_used_label":"Used","memory_cache_label":"Cache","cpu_num":"Single Core | {count} Cores"},"bluetooth_devices":{"title":"Bluetooth Configuration","scan_title":"Scan Settings","enable_bluetooth":"Enable Bluetooth","advanced_setting":"Advanced Setting","scan_type":"Scan Type","active":"Active","passive":"Passive","msec":"msec","scan_interval_time":"Scan Interval Time","scan_window_time":"Scan Window Time","scan_window_time_must_not_be_greater_than_scan_interval_time":"Scan window time must not be greater than scan interval time","scan_window_time_tips":"If coded phy is selected, traditional broadcast packets cannot be scanned","phy":"PHY","phy_tip":"If coded phy is selected, traditional broadcast packets cannot be scanned","broadcast_packets_title":"Broadcast Packets","device_name":"Device Name","rssi":"RSSI","mac":"MAC","raw_data":"Raw Data","no_data":"No Data","loading":"Loading…","broadcast_data":"Broadcast Data","broadcast_packet_type":"Packet Type","normal_package":"Normal","scan_response_package":"Scan Response","structured":"Structured","raw":"Raw","Flags":"Flags","ServiceUUIDs":"Service UUIDs","ServiceClassUUIDs":"Service Class UUIDs","ShortenedLocalName":"Shortened Local Name","CompleteLocalName":"Complete Local Name","TxPowerLevel":"Tx Power Level","ClassOfDevice":"Class Of Device","SimplePairingHashC192":"Simple Pairing Hash C-192","SimplePairingRandomizerR192":"Simple Pairing Randomizer R-192","SecurityManagerTKValue":"Security Manager TK Value","SecurityManagerOutofBandFlags":"Security Manager Out of Band Flags","SlaveConnectionIntervalRange":"Slave Connection Interval Range","ServiceSolicitationUUIDs":"Service Solicitation UUIDs","ServiceDataUUID":"Service Data UUID","PublicTargetAddress":"Public Target Address","RandomTargetAddress":"Random Target Address","Appearance":"Appearance","AdvertisingInterval ":"Advertising Interval","AdvertisingIntervalLong":"Advertising Interval - Long","ManufacturerSpecificData":"Manufacturer Specific Data"},"bluetooth_scanning_mode":{"title":"Bluetooth Scanning Mode","legacy_mode":"Legacy Mode","extended_mode":"Extended Mode","synchronize_mode":"Synchronize Mode","warning_tip":"Bluetooth is not enabled, no broadcast packets are scanned, please go to bluetooth configuration page to enable Bluetooth.","legacy_mode_set":"Legacy Mode Set","extended_mode_set":"Extended Mode Set","synchronize_mode_set":"Synchronize Mode Set","synchronize_mode_set_tip":"Synchronize a maximum of four cycles of broadcasting within the same time","rssi_threshold":"RSSI Threshold","rssi_threshold_tips":"If you set the threshold, the gateway will only report data from devices whose signal strength is greater than the value.","mac_filters":"MAC Filters","mac_filters_setting":"MAC Filters Setting","enable_mac_filters":"Enable MAC Filters","raw_data_filters":"Raw Data Filters","raw_data_filters_setting":"Raw Data Filters Setting","enable_raw_data_filters":"Enable Raw Data Filters","filters_tips":"If this filter is disabled, the filter rules you configure here will not take effect.","ad_type":"AD Type","anywhere":"Anywhere","raw_data":"Raw Data","ad_data":"AD Data","ad_data_tip_one":"This filter mode supports all regular expressions. Please enter the data to be matched in hexadecimal format.","ad_data_tip_two":"If you need an exact match for the entered field, please add '^' and '$' before and after the field, for example ^abc$.","check_repeat_data":"The data already exists","skip":"Skip","timeout":"Sync Timeout","msec":"msec","address":"Address","address_type":"Address Type","public_address":"Public Address","random_address":"Random Address","sid":"SID","add_configuration":"Add Configuration","synchronize_local_setting":"Synchronize Periodic Advertise","sync_local_setting_waning":"Address, address type and sid cannot be duplicated at the same time","open":"Open","close":"Close","in_any":"In Any","flags":"Flags","16_bit_service_class_uuids":"16-bit Service Class UUIDs","complete_16_bit_service_class_uuids":"Complete 16-bit Service Class UUIDs","32_bit_service_class_uuids":"32-bit Service Class UUIDs","complete_32_bit_service_class_uuids":"Complete 32-bit Service Class UUIDs","128_bit_service_class_uuids":"128-bit Service Class UUIDs","complete_128_bit_service_class_uuids":"Complete 128-bit Service Class UUIDs","shortened_localName":"Shortened Local Name","complete_localName":"Complete Local Name","tx_power_level":"Tx Power Level","class_of_device":"Class Of Device","simple_pairing_hash_c_192":"Simple Pairing Hash C-192","simple_pairing_randomizer_r_192":"Simple Pairing Randomizer R-192","security_manager_tk_value":"Security Manager TK Value","security_manager_out_of_band_flags":"Security Manager Out of Band Flags","slave_connection_interval_range":"Slave Connection Interval Range","16_bit_service_solicitation_uuids":"16-bit Service Solicitation UUIDs","128_bit_service_solicitation_uuids":"128-bit Service Solicitation UUIDs","16_bit_service_data_UUID":"16-bit Service Data UUID","manufacturer_specific_data":"Manufacturer Specific Data","mac_check_tip_one":"Example of MAC to be matched: ","mac_check_tip_two":"1. Prefix matching (needs to start with ^, followed by 1~12 hexadecimal characters)","mac_check_tip_three":"2. Suffix matching (needs to end with $, followed by 1~12 hexadecimal characters)","mac_check_tip_four":"3. Any position matching (limited to 1~12 hexadecimal characters)","mac_check_tip_five":"4. Full match","broadcast_package":"Broadcast Package","device_name":"Device Name","rssi":"RSSI","tx_power":"TX Power","mac":"MAC","type":"Type","type_zero":"connectable and scannable undirected","type_one":"connectable undirected","type_two":"connectable directed","type_three":"non-connectable and non-scannable undirected","type_four":"non-connectable and non-scannable directed","type_five":"scannable undirected","type_six":"scannable directed","type_seven":"scan response","connect_device":"Connect Device","structured":"Structured","raw":"Raw","Flags":"Flags","ServiceUUIDs":"Service UUIDs","ServiceClassUUIDs":"Service Class UUIDs","ShortenedLocalName":"Shortened Local Name","CompleteLocalName":"Complete Local Name","TxPowerLevel":"Tx Power Level","ClassOfDevice":"Class Of Device","SimplePairingHashC192":"Simple Pairing Hash C-192","SimplePairingRandomizerR192":"Simple Pairing Randomizer R-192","SecurityManagerTKValue":"Security Manager TK Value","SecurityManagerOutofBandFlags":"Security Manager Out of Band Flags","SlaveConnectionIntervalRange":"Slave Connection Interval Range","ServiceSolicitationUUIDs":"Service Solicitation UUIDs","ServiceDataUUID":"Service Data UUID","PublicTargetAddress":"Public Target Address","RandomTargetAddress":"Random Target Address","Appearance":"Appearance","AdvertisingInterval ":"Advertising Interval","AdvertisingIntervalLong":"Advertising Interval - Long","ManufacturerSpecificData":"Manufacturer Specific Data"},"bluetooth_remote_manage":{"title":"Bluetooth Remote Manage","tips":"After connecting to the remote server, you can remotely control the device and receive the data reported by the device.","tips_connecting":"MQTT connecting...","tips_connected":"MQTT connected","tips_connect_fail":"MQTT connection failed, reconnecting...","enable_remote_manage":"Enable Remote Manage","service_type":"Service Type","host":"Host","port":"Port","enable_tls":"Enable TLS","encryption_mode":"Encryption Mode","upload":"Upload","ca_certificate":"CA Certificate","client_cerificate":"Client Cerificate","client_private_key":"Client Private Key","password_of_key":"Password of Key","username":"Username","password":"Password","topic":"Topic","report":"Report","report_tips":"The gateway will use the topic to push the scanned Bluetooth data to the MQTT Broker.","command":"Command","command_tips":"The gateway will subscribe to the topic to receive control commands issued by the platform.","command_view":"View Supported Commands","response":"Response","response_tips":"The gateway will use the topic to send the command's reception or execution result in response to the control.","advance_settings":"Advance Settings","advance":"Advance","client_id":"Client ID","qos_level":"QoS Level","keep_alive_interval":"Keep Alive Interval","report_url":"Report Url","authentication_type":"Authentication Type","enable_control":"Enable Control","control_url":"Control Url","one_way":"One-way","two_ways":"Two-ways","none":"None","basic":"Basic"},"bluetooth_report":{"title":"Bluetooth Report","base":"Base","mac_filters":"MAC Filters","raw_data_filters":"Raw Data Filters","report_interval":"Report Interval","data_format":"Data Format","report_broadcast_data":"Report Broadcast Data","report_broadcast_data_tips":"If the option is enabled, each reported data will include complete broadcast packet data; otherwise, each reported data will only include the device MAC address and RSSI.","report_gateway_status":"Enable Gateway Status Report","rssi_threshold":"RSSI Threshold","rssi_threshold_tips":"If you set the threshold, the gateway will only report data from devices whose signal strength is greater than the value.","filters":"Filters","enable_mac_filters":"Enable MAC Filters","enable_raw_data_filters":"Enable Raw Data Filters","filters_tips":"If this filter is disabled, the filter rules you configure here will not take effect."},"bluetooth_settings":{"title":"Bluetooth Settings Backup/Restore","backup":"Backup","restore":"Restore","backup_tips":"You can export all Bluetooth-related settings on the page, including scan, connection, remote manage, report, data definition.","backup_button":"Export","include_certificate":"Include TLS Certificate","valid_configuration_success":"Valid configuration file."},"menu_bluetoothdevices":"Bluetooth Configuration","menu_bluetoothscanningmode":"Bluetooth Scanning Mode","menu_bluetoothremotemanage":"Bluetooth Remote Manage","menu_bluetoothreport":"Bluetooth Report","menu_bluetoothsettings":"Settings Backup/Restore","menu_bluetooth":"Bluetooth","reset":{"tips":"In case of malfunction, you can reset router. All your current settings, applications and data will be lost. The process will take about $$$$. DO NOT power off the router during this process.","warning":"Are you sure you want to reset your router to factory default status?","button":"Delete All and Reboot","confirm":"Reset"},"menu_reset":"Reset Firmware","menu_multiwan":"Multi-WAN","multiwan":{"tips":"The router supports connections to multiple network interfaces at the same time. You can configure how these multiple networks should be used.","failover_desc":"Failover: If the current, active link fails, the router will automatically switch to another network interface.","balancing_desc":"Load Balance: Uses multiple network interfaces at the same time to increase the total bandwidth of the router. Note that connections to the same application or site will usually only use one interface.","mode_label":"Mode","mode_failover_tips":"The router automatically selects the next available interface with the highest priority.","mode_balancing_tips":"The system will assign interfaces to new connections based on the load ratio.","mode_balancing_note":"Note: Active connections or traffic are not redirected to match the load ratio.","failover_label":"Failover","balancing_label":"Load Balance","track_title":"Interface Status Track","physical_state_monitor":"Internet always available when the interface is connected","priority_title":"Interface Priority","ratio_title":"Load Ratio","track_desc":"The router tracks the status of the connection to the destination IP to establish whether the interface is available.","track_enable_tips":"If tracking is disabled, the device will assume that the interface is connected to the Internet when the interface is connected (e.g. if a cable is plugged in and an IP address is acquired).","track_proto_label":"Track Protocol","track_method_label":"Track Command","interval_label":"Track Interval","fault_condition_label":"Change to Failure Condition","available_condition_label":"Change to Available Condition","success_count":"Success $$$$ times","fault_count":"Fail $$$$ times","track_addr_label":"Track IP","both_label":"Both","flush_track_tips":"If this option is enabled and the network interface changes, the router will refresh all existing data streams to ensure they are using the highest priority interface. This avoids unnecessary traffic loss, but can lead to an increase in network volatility (for example, some VPNs may not reconnect immediately).","flush_track_label":"Forced Refresh Streams","enable_check_label":"Enable Interface Status Track","interface_state_label":"Network Status","balancing_warning_tips":"At least two interfaces with non-zero load ratios must be configured for the balanced load to work properly. If there is no connectable Internet interface with a non-zero load ratio, the device will not be able to connect to the Internet.","track_mode_label":"Low Data Mode","passive_label":"Low Data Mode","sensitivity_label":"Sensitivity","sensitivity_tips":"This sensitivity determines the time interval for Internet status detection. It is recommended to use low sensitivity when Internet access is unstable to avoid frequent network switching; it is recommended to use high sensitivity when video or live streaming to ensure that you can switch Internet access quickly; switching to high sensitivity may result in network disconnection.Please adjust it with caution.","track_mode_tips":"If this option is enabled, it will only track when there is an interface network error. It is recommended that this be enabled for interfaces that use data traffic billing.","network_tracking_title":"{interface} Status Track","sensitivity_options_label":"Sensitivity Options"},"thread_network":{"title":"Thread Network","ext_mac":"Ext Addr","thread_version":"Thread Version","tx_power":"TX Power","network_details":"Network Details","network_name":"Network Name","pan_id":"PAN ID","entended_pan_id":"Extended PAN ID","network_key":"Network Key","commissioner_credential":"Commissioner Credential","ip_settings":"IP Settings","on_mesh_prefix":"On-Mesh Prefix","edit_tx_power":"The Device Setting","manual_setup":"Manual Setup","network_settings":"Network Settings","generate":"Generate","join_network":"Join Network","available_networks":"Available Networks","details":"Details","rssi":"RSSI","lqi":"LQI","join_with_commissioner":"Join with Commissioner","update_joiner_credential":"Update Joiner Credential","qr_tip":"Use youe OT Commissioner scan the Connect QR Code of the device, or enter the EUI64 and Join Passphrase manually.","link_local_address":"Link-Local Address","local_address":"OMR Address","mesh_local_eid":"Mesh-Local EID","modify_tip":"If you apply these settings, the settings for the entire thread network will be modified.","disable_the_device_info":"If you disable this device, the device will disconnect from the Router and End Device.","disable_the_device_content":"Note: If there are other border routers in the current thread network, the thread network will continue to work. This operation will not remove the authentication information of the device from the thread network until you manually remove it.","join_with_commissioners_waiting":"Joining the network through the commissioner, please wait…","join_network_error":"Join Network Error","join_network_waiting":"Joining the network, please wait…","import_settings":"Import Settings","file_configuration":"File Configuration","manual_configuration":"Manual Configuration","active_dataset_tlvs":"Active Dataset TLVs","export_settings":"Export Settings","download":"Download","pan_id_tips1":"If you enter an integer, the input value Y ranges from 0<=Y<=65535","pan_id_tips2":"If the input is in hexadecimal, the input value Y ranges from 0x0<=Y<=0xffff","ext_pan_id_tips1":"You can enter the numbers \"1-9\" and the letters \"abcdef\".","ext_pan_id_tips2":"Limit to 16-bit characters","network_key_tips1":"You can enter the numbers \"1-9\" and the letters \"abcdef\".","network_key_tips2":"Limit to 32-bit characters","modify_name_tip":"The modification time of network information is affected by the current Thread network state.","eui64":"EUI-64","joiner_credential":"Joiner Credential","check_joiner_credential":"The joiner credential includes A-Z, 0-9 (Excludes I, O, Q, Z)"},"thread_devices":{"title":"Thread Commissioning","opened":"Opened","not_opened":"Not Opened","start":"Start","start_tip":"The Commissioner is disabled. Joiner devices that you add or import now will be recorded. But they can only be joined to the network if the Thread network is enabled.","start_tip_two":"Commissioner is only enabled when the Thread network is enabled.","stop":"Stop","stop_tip_one":"The Commissioner is now enabled. You can now add single or bulk import Joiner devices to the network.","stop_tip_two":"Only one border router can be Commissioning on the same Thread network at the same time. Please finish Commissioning on the other border routers before adding the Joiner.","stop_tip_three_joiners":"Commissioner will be auto stop when all devices have joined or have joined fail.","stop_tip_three_joiners_none":"No Joiner is detected, so Commissioner will stop 90 seconds after it is start.","timeout_tip":"Timeout will be started when Commissioner is enabled.","stop_dialog_tip":"All joiner devices will be considered as join fail status","joiners":"Joiners","introduce":"You can add them as joiners via the device's EUI-64 and Credential.","import":"Import","add":"Add","add_time":"Add Time","deadline":"Deadline","commission_records":"Commission Records","rejoin_all":"Batch rejoin","status":"Status","wait_joiner_start_connect":"Wait Joiner start connect...","wait_commissioner_enable":"Wait Commissioner enable...","ready_to_join":"Ready to Join","joining":"Joining","joined":"Joined","join_fail":"Join Fail","remove":"Remove","add_joiner":"Add Joiner","joiner_eui64":"Joiner EUI-64","joiner_eui64_tip":"The IEEE EUI-64 of the Joiner or '*' to match any Joiner.","joiner_timeout":"Joiner Timeout","eui64_repeat":"The Joiner already exists, please check the entered EUI-64.","eui64_self":"The device itself can't be added as a Joiner.","import_joiners":"Import Joiners","download_template":"Download template","rejoin":"Rejoin","all":"All","only_timeout":"Only Timeout","only_join_fail":"Only Join Fail","only_joined":"Only Joined","remove_joiner_tip":"Are you sure you want to remove this device?","delete_records_all_tip":"Are you sure you want to delete all commission records?","apply_thread_network":"Cannot add Joiner because the device is not in a Thread network. Please enable or join the Thread network.","add_joiner_error":"Only one border router can be Commissioning on the same Thread network at the same time. Please finish Commissioning on the other border routers before adding the Joiner.","commission_records_tips":"Commission records support up to 100 records","add_separately":"Add separately","batch_add":"Batch Add","joiner_tips":"The number of joiners cannot exceed 100","export":"export","no_thread":"No Thread Connection! Check your thread network","eui64":"EUI-64","joiner_credential":"Joiner Credential","check_joiner_credential":"The joiner credential includes A-Z, 0-9 (Excludes I, O, Q, Z)","timeout":"Timeout"},"thread_topologies":{"title":"Thread Topologies","export_data":"Export Data","topology_graph":"Topology Graph","overview":"Overview","statistics":"Statistics","leader_situation":"Leader Situation","device_detail":"Device Detail","base":"Base","buffer_info":"BufferInfo","advanced":"Advanced","name":"Name","rloc16":"RLOC16","extended_mac":"Extended MAC","role":"Role","age":"Age","mode":"Mode","router":"Router","avg_rssi":"Avg RSSI","last_rssi":"Last RSSI","end_device":"End Device","loading_tip":"Please wait to get data","timeout":"Timeout","connectionTime":"ConnectionTime","keep_refresh":"Keep Refresh","bind_the_current_device_name":"Bind the current device name","keep_refresh_tips":"Enabling this feature will continuously send multicast packets to the Thread network, which consumes network bandwidth and is not recommended for large capacity networks.","older_version_tips":"Older versions do not support changes","no_thread":"No Thread Connection! Check your thread network"},"thread_advanced":{"title":"Advanced","srp_server":"SRP Server","introduce_one":"The SRP(Service Registration Protocol) feature enables client devices within a Thread network to register their own services to the border router. These registered services can be invoked via the external network (Internet, WAN, LAN).","introduce_two":"$$$$ $$$$have been registered.$$$$","enable_srp":"Enable SRP","host":"Host","lease":"Lease","key_lease":"Key Lease","seconds":"s","thread_network_srp_tip":"Enable SRP, please start the Thread Network first.","registered_services":"Registered Services","addresses":"Addresses","port":"Port","txt":"TXT","ttl":"TTL","subtypes":"Subtypes","backbone_routers":"Backbone Router","enable_bbr":"Enable BBR","state":"State","sequence_number":"Sequence Number","delay":"Delay","jitter":"Jitter","backbone_interface":"Backbone Interface","thread_network_bbr_tip":"Enable backbone router, please start the Thread Network first.","enable_nat64":"Enable NAT64","thread_network_nat64_tip":"Enable NAT64, please start the Thread Network first.","service":"{count} service | {count} services","timeout":"Timeout"},"menu_threadnetwork":"Thread Network","menu_threaddevices":"Thread Commissioning","menu_threadtopologies":"Thread Topologies","menu_threadadvanced":"Advanced","thread":{"access_router_wds_tips2":"If you need to directly connect your phone/PC to S200 and access the Thread subnet, you need to switch the Backbone Router interface to br-lan;If the phone/PC connects to the S200 superior router and accesses the Thread subnet, please choose (eth0 or wlan-sta0) based on the superior link connection method.","access_router_wds_tips3":"DNS64 and NAT64 are not supported in this mode","access_router_ext_tips2":"If you need to directly connect your phone/PC to S200 and access the Thread subnet, you need to set the interface to br-lan;If the phone/PC connects to the S200 superior router and accesses the Thread subnet, the interface needs to be set to wlan-sta0."},"menu_lanip":"LAN","lan_ip":{"lan":"Router IP Address","guest":"Default Gateway","start_ip":"Start IP Address","end_ip":"End IP Address","change_to":"The router's IP address has been successfully changed to","redirect_to":"You are being redirected to the new IP","guest_conflict_tips":"It is in conflict with Guest IP","lan_conflict_tips":"It is in conflict with LAN IP","ip_outside_tips":"IP address is outside the subnet range","cannot_contain_ip_tips":"The address range can't include the router's IP address","end_smaller_tips":"The end address should be greater than the start address.","lan_or_guest_senior_tip":"You can set subnet within IPv4 private address ranges: 192.168.0.0/16, 172.16.0.0/12, 10.0.0.0/8","lan_or_guest_model_setting":"Advanced","user_count_max":"Maximum Number of Users","lan_tab":"Private Network","guest_tab":"Guest Network","ip_easy_tip":"The router IP Address is the address that you would enter into your browser 's address bar to access the router's admin page.","enable_dhcp_tips":"The DHCP server automatically assigns IP addresses and other communication parameters to client devices. If the DHCP server is disabled, client device network settings will need to be configured manually.","dhcp_serve_title":"DHCP Server","dhcp_charter_label":"Lease Time","lpr_serve_label":"LPR Server","security_title":"Security Settings","ap_isolate_label":"AP Isolation","ap_isolate_tips":"You can isolate your network's client devices into a separate network area. These devices cannot communicate with other devices on the network.","dhcp_disable_warning_tips":"If you disable DHCP, you may not be able to connect to the Internet, so please be careful.","lpr_tips":"Multiple printer LPR ports can be filled.","guest_disabel_tips":"{guest} is disabled so guest networks is not work."},"address_reservation":{"title":"Address Reservation","tips":"When you specify a reserved IP address for a LAN client, the client will always receive the same IP address when it requests an IP address from router’s DHCP server. You can assign reserved IP addresses to computers or servers that require permanent IP settings.","note":"Note: Configured clients have to reconnect the router to activate.","name":"Name","action":"Action","no_data":"There is no data in the table.","add_new":"Add a New Reservation Entry","set_data":"Modify the Reservation Entry","confirm_delete_all":"Are you sure you want to delete all the address reservations?","confirm_delete":"Are you sure you want to delete the reserved address entry?","mac_existed":"MAC Existed","ip_existed":"IP Existed","desc_label":"Description"},"menu_guestip":"Guest Network","ipv6":{"tips":"When IPv6 is enabled, WAN interfaces such as Ethernet will get their IPv6 addresses via DHCPv6. You can also modify the IPv6 address manually in the Ethernet settings page. Some features (firewall, VPN, GoodCloud) do not yet support IPv6.","note":"Note: If you use functions of both VPN and IPv6 at the same time, it's likely to cause IPv6 data leakage.","enable":"Enabled","mode":"Mode","addr":"IPv6 Address","dns_acq":"DNS acquisition method","dns_tips":"DNS is used to find the IP address corresponding to the domain name. Manually setting the DNS server may cause DNS lookup failure. Please use it with caution.","dns_server":"DNS Server","invalid_parameter":"The format you entered is incorrect!","dns_server_empty":"Enter at least one DNS server","native_tips":"This option is only available for private network, guest network always use NAT6 mode."},"menu_ipv6":"IPv6","sdwan":{"no_device_tips":"You must add the device to one of the virtual networks in {cloud} to use this feature.","device_tips":"You have been added to the virtual network {network} . Please go to {cloud} to modify the settings.","nodes_title":"Network Topology","real_time_data_title":"Real-time Data","real_time_data_tips":"Includes only the device's data that has passed through the Gateway; this may be different than the total reported by your billing data.","upload_data_title":"Upload Traffic Data","download_data_title":"Download Traffic Data","interface_title":"Interfaces","interface_tips":"You can disable specific interfaces joining this virtual network."},"menu_sdwan":"AstroWarp","cable":{"title":"Ethernet","no_wan":"No cable detected in WAN port. Please insert an ethernet cable.","rm_wan_cable":"Please remove the ethernet cable from the WAN port.","wan_been_lan":"WAN port has been used as LAN. You can set it back to WAN below","confirm_to_lan":"Are you sure you want to use the WAN port as LAN?","confirm_to_wan":"Are you sure you want to change LAN port back to WAN?","using_as_lan":"Using as LAN, $$$$Change to WAN$$$$","using_as_wan":"Using as WAN, $$$$Change to LAN$$$$","repeated":"Connected successfully without having to reconnect","pppoe_log":"PPPoE Connection Log","setting":"Ethernet Settings","dhcp_tips":"IP address assigned by higher network machine.","pppoe_vlanid_tips":"This settings entry is only required if the provider's PPPoE server requires the interface to use a tagged specific VLAN ID.","egderouter_mode_tips":"Drop-in gateway is enabled. If you want to modify the Ethernet settings, please disable $$$$Drop-in Gateway$$$$ first.","change_to_lan_check_tips":"First, please unplug the Ethernet cable that is plugged into the WAN port. $$$$ re-detect $$$$","change_to_wan_tips":"Once the LAN port is used as a WAN port, you will not be able to access the administrator panel via this Ethernet port connected to the LAN port. Please ensure that your client can connect to Wi-Fi or other LAN port.","change_to_wan_tips2":"You can restore the LAN port (so that it is no longer used as a WAN port) by pressing and holding the reset button on the device for four seconds.","no_wan_tips":"No cable detected.","using_tips":"{silkprint} status: Using as {port}. {changePort}","reset_port_tips":"You can restore the {silkprint} by pressing and holding down the device's reset button for 4 seconds.","use_as_wan_tips":"{asWan}, the device connected to the port can't access the admin panel anymore. You'll have to connect it to Wi-Fi or other LAN ports.","revert_as_lan_tips":"Are you sure to restore the {silkprint} to LAN port (default)?","change_port_btn":"Change to {port}","revert_port_btn":"Restore to {port}","use_as_port_btn":"Change the {silkprint} to {port}","revert_wan_tips":"After you restore the WAN port","use_as_wan_silkprint_tips":"Once the {silkprint} is used as a WAN port"},"tethering":{"title":"Tethering","device":"Device","no_device_tips":"No Tethering device found, Plug in your smartphone or USB Modem to start."},"repeater":{"title":"Repeater","known_net":"Known Networks","options":"Repeater Options","no_tips":"Repeater (STA) is disabled.","change_wifi":"Switch Network","allow_change":"Allow Switching to Other Saved Networks","allow_change_tips":"If the option is enabled, the router will automatically connect to other saved networks when it is unable to connect to the current Wi-Fi network.","antijam":"Force 20MHz Bandwidth for 2.4G","antijam_tips":"If this option is enabled, the device will improve the stability of the connection by reducing the connection rate.","lock_band":"Band Selection","lock_band_tips":"If you manually select a band, the router will not scan or connect to any Wi-Fi that is using another band.","join_wifi":"Join Wi-Fi","join_title":"Join Network","detail_title":"Network Detail","available_wifi":"Available Networks","join_other":"Join Other Network","ssid":"SSID","encryption":"Security","identity":"Username","key":"Password","remember":"Remember","lock_bssid":"Lock BSSID","set_static":"Manually Set Static IP","unlock":"Auto","antijam_tips_2":"It only works when repeating 2.4G Wi-Fi.","retry_connet_tips":"Connection failed, will retry later…","lock_bssid_tips":"If this option is enabled, the router will only connect to the AP corresponding to the BSSID you selected when switching to a network using this SSID.","advanced_settings":"Advanced Settings","allow_dfs":"Allow repeating of DFS channels","allow_dfs_tips1":"If the option is enabled, when the router repeat Wi-Fi on any DFS channel, it will follow the hotspot for DFS channel avoidance. When this Wi-Fi is available, the router's own 5GHz Wi-Fi will use the DFS channel. Otherwise, the router's own 5GHz Wi-Fi will switch back to the non-DFS channel.","allow_dfs_tips2":"If this option is disabled, the router will not connect to any Wi-Fi using DFS channels.","retry_disable_guest_tips":"While attempting to reconnect, your router will periodically scan for Wi-Fi networks, and your guest Wi-Fi network will be temporarily unavailable during this scan.","scan_disable_guest_tips":"During the scan for Wi-Fi signals, your guest network will be temporarily unavailable for about ten seconds. Do you wish to continue?","fail_eap_key_tips":"Incorrect username or password.","fail_key_tips":"Incorrect password.","fail_not_found_tips":"Could not find the network, please check the SSID and security type you entered.","unusable_eap_tips":"This router doesn't support repeat networks that use EAP.","fail_mac_tips":"The MAC address of the router cannot be the same as any Wi-Fi client, please $$$$modify the MAC of the clone$$$$ or modify the MAC address of that client.","scan_wifi_fail_dfs_tips":"The device is running the DFS channel availability check and cannot scan for nearby Wi-Fi. please wait for the check to finish.","connet_dfs_tips":"When the router repeats a WiFi with a DFS channel, if this WiFi is available, the router will use the selected DFS channel. Note that if this WiFi is not available, the channel will be switched, which will result in a brief disconnection of the client connected through the WiFi, and some devices will be reconnected without sensing, while some need to be reconnected manually.","modify_wifi_tips":"Changes in network settings will make the repeater reconnect.","modify_wifi_title":"Modify Network Settings","enable_disguise_label":"Enable Camouflage","enable_disguise_tips":"If this option is enabled, this router camouflage itself as the same device as the client device you are now using.","allow_auto_portal_tips":"If this option is enabled, this router will automatically enter Login Mode for Public Hotspots when it successfully connected to a hotspot but not the Internet. This mode will pause VPNs and custom DNS until it leave, which may cause data leaks to the provider of the hotspot (e.g., hotel/mall).","allow_auto_portal_label":"Auto-Enable Login Mode for Public Hotspots","auto_portal_tips":"The device has entered Login Mode for Public Hotspots to access the Captive Portal's hotspot. After successful login, it will automatically leave this mode.","to_auth_btn":"Go to Login","entered_portal_tips":"The device is in Login Mode for Public Hotspots. VPNs and custom DNS has been paused, which may cause data leaks to the provider of the hotspot (e.g., hotel/mall). After successful login, this router automatically leaves this mode. To leave manually, {exit}.","auto_go_auth_tips":"Automatically {auth} after {count}","need_enter_portal_tips":"Can’t access the internet via the repeated hotspot. Try to enter {portal} to fix the issue. Note this mode will pause VPNs and custom DNS until it leave, which may cause data leaks to the provider of the hotspot (e.g., hotel/mall).","portal_auth_mode_btn":"Login Mode for Public Hotspots","going_to_auth_tips":"Coming soon to the Login page:","cannot_accessed_portal_url_tips":"If you cannot access the login page, try disabling other Internet connections (e.g., ethernet, cellular)."},"modem":{"title":"Cellular","plug_in_tips":"No Modem device found. Plug in your USB modem to start.","manage":"Manage","name":"Modem Name","phone_num":"Phone Number","operator":"Mobile Network Operator","signal":"Signal","upload":"Upload","download":"Download","install_sim":"Install SIM card","install_sim_tips":"Please insert your SIM card into the SIM slot, then","reboot_this":"Reboot Modem","port":"Port","port_tips":"The cdc-wcdm0 port is faster, and the ttyUSBX port has better compatibility.","apn_tips":"Some SIM cards require a specific APN. If you don't know the correct APN, please ask your network operator .","manually_tips":"Manual Input","ttl_tips":"Some network operators will determine whether the SIM card is used by the router by reading the TTL value. If your SIM card cannot be used on the router, you could try to set the TTL to a value other than 64 and 128 (for example, 65).","ttl_placeholder":"Optional, default 64","pin":"Pincode","service":"Service","dial_num":"Dial number","authentication":"Authentication","user_name":"User Name","password":"Password","sim_not_registered":"SIM card not registered","sim_lock":"SIM card has been locked, please input the PIN code to unlock it.","connect_fail_tips":"Connection failed, reconnecting…","manual_setup":"Manual Setup","auto_setup":"Auto Setup","setting":"Cellular Settings","traffic":"Traffic Statistics","traffic_tips":"The traffic statistics are for information only; actual traffic is determined by your network operator and will appear on the bill provided by your network operator.","reset_count":"Clear Statistics","clear_traffic":"Disable Auto Saving of Traffic Statistics","clear_traffic_tips":"If the option is enabled, the system will not automatically save traffic statistics.","not_compatible":"Incompatible Modem","no_sim_tips":"Your SIM card has not been detected. Please check that the card has been inserted correctly and that the contacts are clean. The Modem does not support hot-swappable SIM cards. If you re-inserted the SIM card after boot, please $$$$Reboot Modem$$$$ or reboot your router.","connecting_tips":"Some SIM cards have special usage restrictions, for example, the need to use a specific APN. If your SIM card cannot be registered, please check with your network operator to see if your SIM has any special restrictions.","sim_slot_switching_tips":"SIM card slot switching…","current_sim_label":"Active SIM Card","current_config_title":"Current Settings","saved_config_title":"Saved Profiles","use_other_config_btn":"Use Other Settings","current_config_badge":"In Use","save_config_label":"Save Settings","copy_config_btn":"Clone and Edit","sim_slot_setting_title":"SIM Card Slot Settings","auto_switch_label":"Auto Switch","main_slot_label":"Preferred SIM Card Slot","sim_profile_label":"SIM {index} Settings","sim_no_profile_warning":"No setting has been selected, it will be configured automatically.","choose_other_profile_btn":"Other Settings","sim_failover_interval_label":"Failover Interval","sim_failover_interval_tips":"If the Internet connection is still not available after failover has occurred, the device will switch back to the preferred SIM slot and will only retry failover after this interval.","timing_check_main_sim_label":"Checking Preferred Slot Status Scheduled","timing_check_main_sim_tips":"If this option is enabled, the device will try to switch back to the preferred SIM slot at the specified time. This feature allows you to switch back to the preferred SIM slot when its internet connection is available.","check_main_sim_time_label":"Switching Time","choose_current_slot_label":"SIM Card","remove_profile_warning":"Are you sure you want to delete the profile? The profile cannot be recovered after deletion.","set_detection_tips":"The Internet status is detected in the same way as the settings in the $$$$Multi-WAN$$$$ page.","data_roaming_label":"International Data Roaming","enable_band_filter_label":"Enable Band Masking","band_filter_mode_label":"Masking Mode","band_masking_label":"Block","band_only_label":"Open","band_only_tips":"In \"Open\" mode, the router will only use the bands, the others will be blocked.","band_masking_tips":"In \"Block\" mode, the router will block the following bands.","band_only_warning":"Please select at least one of the allowed bands.","current_badge_label":"Current","current_sim_badge_label":"Active: SIM {sim}","excellent_singal_label":"Excellent","good_singal_label":"Good","fair_singal_label":"Fair","poor_singal_label":"Poor","no_sim_tips2":"Your SIM card has not been detected. Please check that the card has been inserted correctly and that the contacts are clean.","manage_profiles_btn":"Manage Profiles","setting_sim_title":"Settings Used by SIM","select_profile_desc":"You can $$$$ Select a Profile $$$$ to copy the contents of it to the settings used by the SIM card.","save_as_profile_title":"Save as Profile","edit_profile_title":"Modify Profile","add_new_profile_title":"Add a New Profile","select_profile_title":"Select Profile","sim_not_setup_label":"Not Setup","has_been_choose_profile_desc":"You have copied the contents of {profileName}. $$$$ Copy Another Profile$$$$","name_already_exist_tips":"This name already exists.","history_signal_title":"Historical Signal Record","lock_tower_title":"Lock Tower","available_tower_title":"Available Tower","locked_tower_tips":"If the locked tower does not match the band masking or APN parameters in the cellular settings, the cellular interface will not be able to connect to the Internet.","device_may_not_b_tips":"The device may not be able to scan all towers when the Cellular interface is enabled.","cellular_desc":"The Cellular interface will reconnect to switch to the locked tower.","scan_tower_msg":"This may take a few minutes. Please be patient.","sim_tower_title":"SIM {sim} Tower","tower_locked_tips":"Tower Locked","reboot_buildin_modem_btn":"Reboot Build-in Modem","reboot_buildin_modem_warning":"Are you sure want to reboot the built-in Modem ?","lte_plus_tips":"Some device may display 4G+ as 5G","sim_slot_pin_mark_tips":"The SIM card slot has been marked and cannot be automatically switched.","pin_verify_success_tips":"PIN code verification successful.","need_pin_no_history_tips":"You need to enter the PIN code, and you have {count} attempts remaining.","need_pin_history_tips":"The PIN code {value} is incorrect. You have {count} attempts remaining.","pin_locked_no_history_tips":"SIM card was locked.","pin_locked_history_tips":"PIM code {value} error, SIM card was locked.","protocol_tips":"The QCM/QMI protocol are faster, and the 3G protocol has better compatibility.","certification_info_btn":"Certification Info","last_pin_tips":"There is one last remaining try to unlock the PIN code for this SIM card, if it fails to be entered again, you will need to use the PUK code to unlock it. To prevent your SIM card from being locked, the device will not dial again, so please use your phone to unlock it.","need_pin_tips":"SIM card is locked, please check if there is a PIN code entered or if the PIN code entered is correct."},"router_visual":{"wlan_client":"WLAN Clients","lan_Client":"LAN Clients"},"sms":{"title":"SMS","send_sms":"Send Message","receive":"Receive","all_read":"All Read","del_read":"Delete read messages","send":"Send","not_found_sms_modem":"This modem does not support SMS","from":"From","to":"Send to","sent":"Sent","sending":"Sending","send_fail":"Send failed","body":"SMS contents","reply":"Reply","resend":"Resend","del_sms":"Delete","send_new":"Create New Message","resend_sms":"Resend SMS","reply_sms":"Reply to","recipient":"recipient","send_modem":"From modem(SIM)","confirm_del":"Confirm Delete","invalid_dial_num":"Invalid Dial number","international":"International","national":"National","unknown":"Unknown","no_sms":"No message","detail":"SMS Details","send_error_msg1":"The Modem has not been detected.","send_error_msg2":"Unknown error.","send_error_msg3":"Failed to send.","send_error_msg4":"Send timeout.","send_error_msg5":"The device doesn't support SMS Feature.","send_error_msg6":"The current network environment doesn't support SMS Feature.","forward_email_tips":"If you want to forward SMS to email, please set the sender email first. This is the email address that the SMS will be sent from.","forward_smtp_title":"Sender Mailbox (SMTP)","forward_title":"SMS Forwarding","forward_email_label":"Email","forward_smtp_server_label":"SMTP Server Address","forward_encryp_label":"Encryption Method","forward_email_account_label":"Username","forward_email_subject_label":"Subject","forward_email_list_title":"Target Email","forward_email_subject_tips":"You can modify the subject so that you can identify which phone number the SMS was received from.","forward_add_email_btn":"Add Email","forward_add_phone_btn":"Add Phone Number","forward_phone_tips":"If you want the router to forward SMS to your cell phone, make sure that your mobile network is available and supports sending SMS.","forward_no_encryp_label":"None","forward_tips":"To prevent circularity, SMS forwarding will not be allowed when the local number is entered here. Additionally, if the Modem does not read the number of your SIM card, SMS forwarding will not be executed.","forward_email_title":"Forward via Email","forward_sms_title":"Forward via SMS"},"modemmanage":{"title":"Management","info":"Modem Info","no_modem":"No Modem device found","at_command":"AT Command","soft_reset":"Soft Reboot","port":"Port","shortcut":"Shortcut","send":"Send","cell_info":"Cells Info","copy":"Copy","refresh":"Refresh","success_copy":"Copy successful","reboot_sucess":"Success, please wait for $$$$ seconds.","export_debug_info":"Export Debug Info","hardware_reset":"Hard Reboot"},"menu_internet":"Internet","menu_edgerouter":"Drop-in Gateway","edgerouter":{"desc":"When drop-in gateway mode is enabled, all traffic from clients on the network is first processed by this router. You can use this mode to extend the functionality of your primary router.","enable_label":"Enable Drop-in Gateway Mode","dhcp_closed_tips":"The DHCP service on the main router is disabled, drop-in gateway is working.","dhcp_on_tips":"The DHCP service is still enabled on the main router. Drop-in gateway may not work properly. Please go to $$$$the main router admin panel$$$$ to disable the DHCP service or set its gateway to {ip}.","enable_tips":"When drop-in gateway mode is enabled, the DNS settings of this router are used instead of those from the main router.","dhcp_on_warning_tips":"Drop-in gateway is enabled.","dhcp_set_gateway_tips":"The DHCP service on the main router has correctly set the gateway to {ip}, drop-in gateway is working.","auto_set_tips":"The DHCP settings of the parent router appear to have changed and the router may not be able to connect to the network properly. Please $$$$Sync the Settings from DHCP$$$$ or modify your settings manually.","desc_vpn":"Please note that in Drop-in Gateway mode, the VPN policy of this device will not work for clients from the WAN port.","cable_not_connected_tips":"No cable detected in the WAN port. Please insert an ethernet cable.","modify_superior_router_label":"All devices are networked through drop-in gateway","modify_superior_router_desc":"You need to go to modify the primary route configuration, which must be configured by a user who has access to the primary route.","modify_self_router_label":"Some devices select their own networking gateway","modify_self_router_desc":"You need to manually change the gateway address to the IP address of the drop-in gateway on some of the devices that need to use the drop-in gateway.","configuration_method_label":"Configuration method"},"menu_netnat":"Network Acceleration","netnat":{"desc":"Network acceleration reduces CPU load and speeds up traffic packet forwarding, but can conflict with some features.","tips":"When Network acceleration is enabled, the following functions will not work properly: Client Speed and Traffic Statistics, Client Speed Limit,Parent Control.","hwnat_label":"Hardware Acceleration","swnat_label":"Software Acceleration","wifi_reload_tips":"Switching or toggling hardware acceleration requires WIFI module reload, with wait times of 10 seconds to 1 minute."},"menu_olede750":"OLED Screen Settings","olede750":{"show_wifi_pwd_label":"Show the Wi-Fi Password","show_wifi_pwd_tips":"If this option is enabled, the Wi-Fi password will be displayed on the 2.4GHz Wi-Fi page and the 5GHz Wi-Fi page. Otherwise, they will only show the SSID.","show_main_label":"Enable Base Status Page","show_main_tips":"This page displays the network status, number of clients, Wi-Fi status, battery level, and current time.","show_2g_label":"Enable 2.4GHz Wi-Fi Info Page","show_5g_label":"Enable 5GHz Wi-Fi Info Page","show_lanip_label":"Enable LAN Info Page","show_lanip_tips":"This page displays the network mode, router LAN IP.","show_vpn_label":"Enable VPN Status Page","show_custom_label":"Enable Customized Text Page","custom_content_label":"Customized Text","tips":"The OLED screen has a total of 6 pages which you can customize the content to be viewed by selecting the page to be displayed. If multiple pages are enabled for display, you can short press the power button to switch the screen to the next page."},"menu_timedtask":"Scheduled Tasks","timedtask":{"desc":"If the device is shutdown at the set time, the task will not be executed.","on_time_label":"Turn On Time","off_time_label":"Turn Off Time","reboot_title":"Schedule Reboot","reboot_time_label":"Reboot Time","wifi_mode_label":"Wi-Fi Scheduled Mode","wifi_turn_onoff_label":"Turn On/Off","wifi_power_switch_label":"Switch TX Power","enable_wifi_label":"Enable Main Wi-Fi Schedule","enable_guest_wifi_label":"Enable Guest Wi-Fi Schedule","host_wifi_title":"Main Wi-Fi","guest_wifi_title":"Guest Wi-Fi","switch_label":"Set to","switch_time_label":"Switch","restore_label":"Set to","restore_time_label":"Restore","enable_scheduled_label":"Enable Scheduled","led_title":"LED Display Schedule","wifi_title":"$$$$ Wi-Fi Status Schedule"},"bridge":{"tips_one":"When you change the router’s network mode, you may need to reconnect all of your client devices.","tips_two":"When you use $$$$ mode, you will not be able to connect to this UI again. You can press and hold the reset button for 4 seconds to revert to router mode.","mode_switch":"Mode Switch","router":"Router","ap":"Access Point","wds":"WDS","ssid":"Wi-Fi Name (SSID)","password":"Password","holder_choose":"Please Choose","access_router":"Accessing Your Router","access_router_wds_tips":"After bridging is successful, your router will automatically obtain an IP address from the main router. If you need to access this router's UI, you must connect using the IP address that was issued by the main router. To get this IP, check the connected clients list in your main router's UI. If you do not have access to the main router's UI, you can restore the routing mode by holding down the reset button for 4 seconds.","access_router_ext_tips":"After bridging is successful, if you need to access the UI of this router, you must manually configure your PC/mobile phone to a static IP address in the same address range as the router. If you still cannot access the UI, you can restore the routing mode by holding down the reset button for 4 seconds.","reset_mac_tips":"Please reset your MAC to factory MAC in MAC clone.","set_up_ap_tips":"To set up Access Point mode, you need to connect an Ethernet cable to the WAN port first.","remove_wan_tips":"Please remove the Ethernet cable from the WAN port.","enter_pwd_tips":"Please enter password","choose_ssid_tips":"Please choose SSID","router_desc":"Create your own private network. The router will act as NAT, firewall and DHCP server.","relay":"Extender","ap_desc":"Connect to a wired network and broadcast a wireless network.","relay_desc":"Extend the Wi-Fi coverage of an existing wireless network.","wds_desc":"Similar to Extender, please choose WDS if your main router supports WDS mode.","connet_fail_msg":"Connection failed.","lan_conflict_msg":"The LAN subnet conflicts with the Wifi subnet to be connected, please set a different subnet.","get_ip_fail_msg":"Failed to get IP.","bridge_pattern_label":"Bridge","bridge_pattern_desc":"Connect to a wired network.","force_subnet_label":"Force 24 Subnet","subnet_mode_bable":"Subnet Mode","passthrough_desc":"If IP Passthrough is enabled, the router will pass the carrier IP address to the LAN port.","passthrough_close_warning":"If you switch to this mode, Repeater, Wireless, Clients, VPN, and AdGuard Home will be disabled.","passthrough_conflict_warning":"This mode may not work if any of the following settings are enabled Tethering, Drop-In Gateway mode, IPv6, manually set DNS, Multi-WAN set to load balanced mode, WAN port set as LAN, VPN policy is in use, Any firewall setting has been added, MAC address has been set manually.","passthrough_conflict_2b_warning":"This mode may not work if you have the following settings: enabled drop-in gateway mode, enabled IPv6, manually set DNS, set Multi-WAN to load balanced mode, set WAN port as LAN, used VPN policy, added any firewall setting, manually set MAC address.","passthrough_secondwan_warning":"IP Passthrough mode requires and can only have one WAN port. Please go to the $$$$ page to modify it to cancel the use of the WAN port as a LAN port or to cancel the use of the LAN as a WAN port.","set_up_bridge_tips":"To set up Bridge mode, you need to connect an Ethernet cable to the WAN port first."},"menu_bridge":"Network Mode","tailscale":{"desc":"$$$$Tailscale$$$$ makes the devices you own accessible anywhere in the world, securely and effortlessly. It enables encrypted point-to-point connections, which means only devices on your private network can communicate with each other. You can use it to access your devices or LAN remotely.","need_login_tips":"The Tailscale service is enabled, but the device is not bound yet. Please bind this device to your Tailscale account using $$$$The Device Bind Link$$$$.","need_mandate_tips":"This device is bound to Tailscale account, but has not yet been authorised for access to the network.Please go to $$$$ Tailscale Admin Console$$$$ to authorise the device to connect to your virtual network. If this is not your account, please unbind it first.","enable_lan_tips":"The device already allows Tailscale clients to access resources on the LAN or WAN. But you need to edit route settings in $$$$Tailscale Admin Console$$$$ for client requests to be forwarded to the device through Tailscale virtual network.","ready_tips":"The device is connected to your Tailscale virtual network.","enable_lan_label":"Allow Remote Access LAN","account_label":"Bind Account","logout_btn":"Unbind","current_ip_label":"Router Virtual IP","get_url_err_msg":"Failed to get device binding link.","enable_wan_label":"Allow Remote Access WAN","allow_lan_tips":"If this option is enabled, the resources inside the device LAN will be allowed to be accessed via the Tailscale virtual network.","allow_wan_tips":"If this option is enabled, the resources on the WAN side of the device will be allowed to be accessed via the Tailscale virtual network.","exit_node_tips":"If the Exit Node you have selected is not available or cannot access Internet, the device will not be able to synchronise the settings to Tailscale.","custom_exit_node_tips":"If this option is enabled, the device will forward all requests to the Exit Node. Before enabled, you need to enable subnet routes {subnet} of this device in $$$$Tailscale Admin Console$$$$ for Tailscale to forward client requests; otherwise, your clients will not be able to access the Internet.","manual_node_label":"Custom Exit Node","exit_node_label":"Exit Node","current_ip_tips":"Tailscale uses the 100.64.0.0/10 subnet, which may conflict with an ISP-assigned address or VPN client address. If your WAN IP or VPN IP is an address within this subnet, disable Tailscale to avoid being unable to network.","custom_exit_node_warning":"If you enable Custom Exit Node, the device will forward all requests to the Exit Node. Before enabled, you must enable subnet routes {subnet} of this device in $$$$Tailscale Admin Console$$$$ for Tailscale to forward client requests; otherwise, your clients will not be able to access the Internet.","dns_warning_tips":"When using an intranet IP address as DNS, you may not be able to access the DNS server."},"tor":{"desc":"Tor (derived from \"The Onion Router\") is free, open source software for enabling anonymous communication. It helps users to explore the internet with privacy.","matter_tips":"This feature is currently in beta, and may cause issues in some countries.","manual_label":"Custom Exit Node","exit_node_label":"Exit Node","exit_node_tips":"You can choose a custom location that will appear in trackers.","log_title":"Tor Log","use_tips":"When Tor is enabled, the following features will not work properly: VPN, DNS, IPv6 and ADGuard Home."},"menu_clients":"Clients","clients":{"online_client":"Online Clients","offline_client":"Offline Clients","name":"Name","speed":"Speed","traffic":"Traffic","access_wan":"Access WAN","block_wan":"Block WAN","action":"Action","unknown":"Unknown","self":"self","limit_speed":"Limit Speed","remove_limit":"Disable Limit","delete_client":"Remove Client","limit_speed_title":"Limit Speed Settings","upload":"Upload","download":"Download","delete_all_caution":"Are you sure you want to remove all clients from the list?\nThis action does not prevent the client from subsequently reconnecting to the router, but all settings for the clients will be removed.","delete_caution":"Are you sure you want to remove the client from the list?\nThis action does not prevent the client from subsequently  reconnecting to the router, but all settings for the client will be removed.","random_mac_tips":"This is a randomised MAC address.","random_mac_warning_tips":"Your settings for the client may be invalidated because of the change to the device's MAC address.","unlimited_hint":"Unlimited","sort_by":"Sort by $$$$","ascending":"Ascending","descending":"Descending","default":"Default","upload_speed":"Upload Speed","download_speed":"Download Speed","computer":"Desktop","phone":"Phone","camera":"Camera","watch":"Wearable device","laptop":"Laptop","printer":"Printer","sound":"Sound","edit_device_title":"Modify Client Device","device_type_label":"Device Type","speed_tips":"This data represents the average speed over the last 3 minutes.\nNote: The system begins calculating the average speed when this page is opened (Eg. If the page is opened for 10 seconds, the average speed will be based on only 10 seconds worth of data).","television":"Television","smart_appliances":"Smart Appliances","games":"Games","gateway":"Gateway","pad":"Tablet PC","clear_traffic_label":"Clear Traffic Statistics","clear_traffic_caution":"Are you sure you want to remove all traffic statistics?","clear_btn":"Clear","hardware_acceleration_warning":"$$$$Hardware Acceleration$$$$ is enabled, Client Speed and Traffic Statistics are abnormal, Client Speed Limit is not working.","network_acceleration_warning":"$$$$Network Acceleration$$$$ is enabled, Client Speed and Traffic Statistics are abnormal, Client Speed Limit is not working.","block_label":"Block","access_label":"Access","access_control_label":"Access Control","access_control_tips":"Access control allows or blocks access to your network from specific client devices.","access_control_black_tips":"A client device can't connect to the LAN or WAN if it is blocked.","access_control_white_tips":"A client device can only connect to the LAN or WAN if it is allowed access.","import_mac_label":"Import Clients","self_mac_label":"Self MAC","import_mac_tips":"You can import client device MAC addresses into the list. $$$$Download Import Template$$$$","import_mac_add_tips":"The successfully imported MAC addresses will be appended to the list.","parse_mac_error_tips":"Failed to resolve the MAC address, please check the file and re-upload it.","parse_mac_success_tips":"1 valid MAC address has been resolved. | {count} valid MAC addresses have been resolved.","parse_mac_warning_tips":"1 entry is not a valid MAC address it will be discarded if the import is confirmed. | {count} entries are not valid MAC addresses they will be discarded if the import is confirmed.","import_btn":"Import","blacklist_self_error_tips":"Disable adding the self MAC to the blocklist.","whitelist_self_error_tips":"The allowlist must contain the self MAC.","toggle_speed_unit_btn":"Toggle Rate Unit","details_title":"Client Details","link_method_label":"Connection Method"},"netadvanced":{"full_cone_nat_tips":"Full Cone NAT can be used to reduce game latency, but enabling Full Cone NAT may be less secure.","sip_alg_tips":"SIP ALG can be used to mitigate the effects of multiple NATs, but in most cases it will not help. Enabling SIP ALG may affect VoIP calls such as one-way audio (only one party can hear the other), phones not ringing during a call, phones dropping while connected, and calls going directly to voicemail."},"menu_netadvanced":"NAT Settings","devices":{"title":"Devices","online":"Online","offline":"Offline","name":"Name","ext_mac":"Ext Addr","extended_mac":"Extended MAC","temperature":"Temperature","pressure":"Pressure","relative_humidity":"Relative humidity","illuminance":"Illuminance","last_report":"Last report","action":"Action","battery":"Battery","fahrenheit":"Fahrenheit","celsius":"Celsius","high":"High","medium":"Medium","low":"Low","firmware_type":"Firmware Type","new_devices":"New Devices","new_devices_tip":"$$$$ have been joined. Please select their device type.","joined_time":"Joined Time","batch_type":"Batch Type","batch_set":"Batch Set","single_set":"Single Set","devices_firmware_upgrade":"Devices firmware upgrade","devices_firmware_upgrading":"Devices firmware upgrading","devices_firmware_upgrade_tip_one":"The following devices has new firmware upgrade.","devices_firmware_upgrade_tip_two":"It takes around 2 minutes to upgrade one devices. Please keep the devices powered.","devices_firmware_upgraded_tip":"All devices has been upgraded to the latest firmware.","devices_firmware_upgraded_step_two_tip_one":"The following sensors can be firmware upgraded to the new version.","devices_firmware_upgraded_step_two_tip_two":"Router mode consumes more energy,it is beeter to use power supply power.","devices_firmware_upgraded_step_three_tip":"Sensor firmware upgrade in progress…","upgrade":"Upgrade","not_upgrade":"Not Upgrade","prepare_for_upgrade":"Prepare for Upgrade","upgrading":"Upgrading","upgrade_all":"Upgrade All","set_upgrade_warning":"No device requires firmware upgrade","upgrade_failed":"Upgrade failed","report_settings":"Report settings","report_settings_tip":"When a change in the value of temperature/pressure/relative humidity/Illuminance is monitored above the change threshold, the device will immediately report the current value.","temperature_change_threshold":"Temperature change threshold","pressure_change_threshold":"Pressure change threshold","relative_humidity_change_threshold":"Relative humidity change threshold","illuminance_change_threshold":"Illuminance change threshold","view_records":"View Records","edit_device":"Edit Device","reset_device":"Reset Device","remove_device":"Remove Device","remove_all_devices":"Remove All Device","eui64":"EUI-64","remove":"Remove","reset_device_tip":"All data will be cleared, and the device will be disconnected from the network and restored to the factory state.","reset_device_confirmation":"Are you sure to reset the device?","reset_device_ban":"Device is upgraded, no reset allowed.","remove_device_confirmation":"Are you sure to remove the device?","remove_device_ban":"Device is upgraded, no removal is allowed.","remove_all_devices_confirmation":"Are you sure to remove all the devices?","remove_all_devices_ban":"Some devices are upgraded, all removals are prohibited","view":"View","device":"Device:","type":"Type","add_devices":"Add Devices","enable_thread_network":"Please enable $$$$Thread Network $$$$ before adding devices.","open_devices_commissioning":"Open Device Commissioning","open_devices_commissioning_tips":"If the gateway allows a new device to be on the network, you can just $$$$Press the Button on The Device $$$$to get it on the network quickly.","open_devices_commissioning_tips_one":"You can open device commissioning for a certain amount of time to allow other devices to join this Thread network.","open_devices_commissioning_tips_two":"Please $$$$press the paring button on your thread device $$$$ to pair with this board router.","allow_new_devices_join":"Allow New Devices To Join","duration":"Duration","apply_thread_network":"Cannot add Device because the device is not in a Thread network. Please enable or join the Thread network.","get_code":"Get Code","code_examples":"Code Examples","read_sensor_data":"Read sensor data from devices","turn_on_off_led":"Turn on/off LED and controlling LED colors","gpio_control":"GPIO control","user_action_trigger":"User action trigger","sensor_trigger":"Sensor trigger","device_detail":"Device Detail","version":"Version","device_information":"Device Information","sensor_data":"Sensor Data","no_thread":"No Thread Connection! Check your thread network","new_device":"{count} new device | {count} new devices"},"automations":{"title":"Automations","triggers":"Triggers","actuators":"Actuators","turning_the_knob":"Turning the Knob","press_the_knob":"Press the Knob","human_body_detected":"Human Body Detected","when_people_are_detected":"When people are detected","light_up":"Light UP","light_down":"Light Down","light_toggle":"Light Toggle","change_color":"Change Color","webhook":"Webhook","create_automations":"Create Automations","create_automations_type_tip":"Please select when you want this automation to be triggered?","create_automations_trigger_tip":"Please select the device(s) to be used as an trigger.","create_automations_operation_tip":"What operations do these devices trigger automation?","create_automations_operation_type_tip":"Please select the type of operation you wish to execute.","create_automations_actuator_tip":"Please select the device(s) to be used as an actuator.","create_automations_action_tip":"What actions do these devices execute?","at_a_specific_time":"At a Specific Time","user_action":"User action","user_action_eg":"e.g. user move or press button","sensor_trigger":"Sensor trigger","sensor_trigger_eg":"e.g. sensor data changed","back":"Back","next":"Next","action":"Action","device_action":"Device(s) Action","edit_webhook":"Edit Webhook","webhook_url":"Webhook Url","request_body":"Request Body","webhook_operation_doc":"Webhook Example","manage_devices":"Manage Devices","manage_devices_tip":"Please select the device to be used as an actuator. These devices will be lighted up when the event is triggered.","manage_devices_warning":"Please select the device(s) to be used.","edit_name":"Edit Name","name":"Name","delete_automation":"Delete Automation","delete_automation_tip":"Are you sure you want to delete this automation?","delete":"Delete"},"menu_devboarddevices":"Devices","menu_devboardautomations":"Automations","menu_gldevboard":"GL Dev Board","process":{"installing":"Installing","upgrading":"Upgrading","rebooting":"Rebooting","reverting":"Reverting","upgrade_tips":"If you are unable to access your router's web panel after the firmware upgrade, please try to clear the browser cache.","install_tips":"Software installation will take a few minutes. Please do NOT refresh the page until it is finished.","reboot_tips":"Router reboot takes about $$$$. Please do NOT refresh the page until it is finished.","revert_tips":"Reseting Firmware takes about $$$$. All your current settings, applications and data will be cleared. Please do NOT refresh the page until it is finished.","wait_tips":"If this process is taking too long to complete, please follow the troubleshooting guides at","restore":"Restoring","restore_tips":"Restoring backup takes about $$$$. Please do not refresh the page until it is finished."},"menu_advanced":"Advanced Settings","advanced":{"note_two":"It is provided as is. GL.iNet is not responsible for LuCI maintenance.","note_one":"You can modify advanced settings with LuCI, the default web user interface of OpenWrt. LuCI is an open and independent project maintained by OpenWrt."},"cloud":{"title":"GoodCloud","tips":"With GoodCloud, you can manage groups of  routers, check their status in real-time, set up routers remotely, operate routers in batch and monitor connected clients etc.","bound_by":"The device is bound by","on":"on","unbind":"Unbind","id_is":"Your device ID is","add_id_tips":"Please use this ID to bind the device to your cloud account.","enable":"Enable","device_id":"Device ID","data_server":"Data Server","holder_choose":"Please Choose","choose_data_server_tips":"Please choose a data server","agree":"I have read and agree","terms":"Terms of Service","privacy":"Privacy Policy","unbind_tips":"Are you sure you want to unbind the device from GoodCloud? The device is bound to:","user":"User","region":"Region","unbind_note":"Note: This will only take effect in the selected region. If you bound this device on different regions, do this on each region.","unbind_success":"Unbind Successful.","view_log":"View Logs","enable_remote_ssh":"Enable Remote SSH","enable_remote_web":"Enable Remote Web Access","device_mac":"Device MAC","device_sn":"Device S/N","europe_label":"Europe","america_label":"America","asia_pacific_label":"Asia Pacific","china_label":"China","unbound_tips":"The device is not bound to any cloud account.","token_invalid_tips":"Device security key verification failed, please $$$$Rebind the Device$$$$ to connect {cloud}."},"menu_cloud":"GoodCloud","login":{"login":"Login","admin_password":"Admin Password","password_hint":{"placeholder":"Please enter password","null":"WARNING: Cannot be empty!"},"forgot_password":{"title":"Forgot Password","desc":"Try to press and hold the 'Reset' button for 10 seconds, then release. You will see the LED lights blink. Wait for the router to reboot and then start again.","online_docs":"Online docs"},"err_msg":"Incorrect Username or password!","retry_after":"Too many failed login attempts, please try again in $$$$ seconds."},"adminpw":{"old_pwd":"Old Password","new_pwd":"New Password","confirm_pwd":"Confirm Password","warning":"Your new password cannot be the same as your old password","confirm_pwd_tips":"Enter new password again","old_pwd_tips":"Enter old password","new_pwd_tips":"Enter new password","old_pwd_error":"Old password is incorrect!","title":"Admin Password"},"menu_adminpw":"Admin Password","dns":{"edit_host_btn":"Edit Hosts","desc":"When you set custom DNS servers, any DNS queries will be resolved through them (instead of the DNS servers obtained through Ethernet, Repeater, Cellular, Tethering). Otherwise, you will use the DNS settings configured for each interface.","rebinding_label":"DNS Rebinding Attack Protection","rebinding_tips":"Turning this option on may cause private DNS lookup failure. If your network has a captive portal please disable this option.","override_label":"Override DNS Settings of All Clients","override_tips":"If enabled, your router will override unencrypted DNS settings for all clients.","set_dns_server_title":"DNS Server Settings","mode":"Mode","proxy_addr_label":"Proxy Server Address","encryption_type_label":"Encryption Type","v1_tips":"The router uses version v1 of DNS. Not all encrypted DNS servers are supported.","server":"Servers","server_tips":"You can choose up to eight servers. The router will automatically choose the fastest server among them.","at_least_one_server_tips":"Select at least one server","select_server_btn":"Select Servers","choose_server_title":"Select DNS Servers","select_all_label":"All","select_log_label":"Log","select_nolog_label":"No Log","select_filter_label":"Filter","select_nofilter_label":"No Filter","select_nodnssec_label":"No DNSSEC","host_tips":"Requests from clients will be resolved, initially, using the static DNS rules you have written in Hosts.","auto_get_label":"Automatic","choose_encryption_label":"Encrypted DNS","manual_label":"Manual DNS","set_proxy_label":"DNS Proxy","form_wan_label":"DNS from Ethernet","form_wwan_label":"DNS from Repeater","form_tethering_label":"DNS from Tethering","form_modem_label":"DNS from Cellular","form_ovpn_label":"DNS from OpenVPN","form_wg_label":"DNS from WireGuard","provider":"DNS Provider","adguardhome_in_use_tips":"AdGuard Home is enabled and this router will use the DNS server provided by AdGuard Home as the custom DNS server. The DNS server settings will not work.","server_warning_tips":"The server appears to have expired.","form_interface_label":"DNS from {interface}","bark_enable_override_tips":"Bark blocks almost all DNS requests from clients sent to the Internet. If you enable this option while Bark is working, your clients may not be able to access the Internet.","override_vpn_label":"Allow Custom DNS to Override VPN DNS","override_vpn_tips":"If this option is enabled, once you have set custom DNS, packets transmitted through the VPN tunnel will be resolved using the custom DNS override instead of the DNS server settings from the VPN connections."},"firewall":{"port_forwards":"Port Forwarding","open_ports_on_router":"Open Ports on Router","port_forwards_desc":"If you have servers in your LAN subnet and want them be accessible from the WAN side, you need to set up port forwarding to these servers, identified by IP addresses and ports. The device will prioritize the higher-priority rule if there is a conflict between the {external_ports} of two enabled rules.","open_port_on_router_dest":"For security reasons, the services that you install on the device are only opened to its LAN network. If you want them to be accessible from the WAN network, you need to open ports for these services on the WAN.","dmz_desc":"DMZ lets you to expose one local computer to the Internet, all inbound packets will be redirected to this computer.","dmz_tips":"If you enable DMZ, your port forwarding and port open rules will not take effect.","open_dmz":"Enable DMZ","dmz_host_ip":"DMZ Host IP","name":"Name","protocol":"Protocol","external_zone":"External Zone","external_ports":"External Port","internal_zone":"Internal Zone","internal_ip":"Internal IP","internal_ports":"Internal Port","port":"Port","action":"Action","no_data":"No data in the table","add_port_forwards_title":"Add New Port Forwarding Rule","edit_port_forwards_title":"Modify Port Forwarding Rule","add_router_prot_title":"Add New Open Port","edit_router_prot_title":"Modify Open Port","delete_all_port_tips":"Are you sure you want to delete all entries?","confirm_delete_tips":"Are you sure you want to delete the entry?","source":"Source (zone, port)","dest":"Destination (zone, IP, port)","enable":"Enable","priority_label":"Priority","dmz_priority_higher_label":"Highest","dmz_priority_lower_label":"Lowest","adjust _priority_btn":"Adjust Priority","port_value_tips":"The port range is from 1 to 65535. You can set a single port or set the port range by concatenating the first and last port numbers with the - symbol (Such as 501-510).","port_range_tips":"{exPort} does not match the {inPort} range."},"menu_firewallview":"Firewall","security":{"local_access_title":"Local Access Control","redirect_https_label":"Force HTTPS","session_timeout_label":"Auto-Logout Time","apply_success_tips":"Applied Successfully; waiting for the web server to restart.","remote_access_title":"Remote Access Control","enable_ping_label":"Allow Ping from WAN","enable_https_label":"HTTPS Remote Access","enable_ssh_label":"SSH Remote Access","enable_ipaddr_label":"Allow Remote Access only from Specific IPs","enable_ipaddr_tips":"Add multiple specific IP addresses to manage the router from this device.","ipaddr_list_label":"IP Address List","no_ipaddr_list_label":"No IP Address","add_ipaddr_btn":"Add an IP Address","port_disabled_tips":"This port is forbidden by the browser","add_ipaddr_tips":"An example of the IP address style you can enter is (also supports IPv6 format) e.g.192.168.8.1.","session_timeout_tips":"Interval between closing or hibernating the browser page and logging out.","port_conflict_tips":"That port is already in use."},"menu_security":"Security","nas":{"nas_tips":"This page only provides the shared folder management function. If you need to manage the files in your storage device, please $$$$Use the Smartphone Apps $$$$.","disk_title":"Disk Management","disk_name_th":"Disk Name","disk_size_th":"Disk Size","eject_th":"Eject","file_server_label":"File Services","share_folder_label":"Shared Folders","user_manage_label":"User Management","sd_card":"SD Card","usb_card":"USB Flash Drive","no_device":"No Device Detected","arrow_wan_label":"Allow Access $$$$ from WAN","has_shared":"Shared","shared_folder_tips":"You need to enable the corresponding file service ( {protos} ) to access your shared folders through this protocol.","path_th":"Path","access_proto_th":"Access Protocol","is_ok_th":"Validity","usable":"Usable","unusable":"Unusable","share_link_btn":"Shared Link","add_share_title":"Add Shared Folder","set_share_title":"Shared Folder Settings","server_config_title":"Samba Settings","share_name_label":"Share Name","anonymity_label":"Anonymous Access","allow_write_label":"Allow Write","public_user_label":"Read-Write User","readonly_user":"Read-only User","add_user_btn":"Add User","folder_link_title":"Folder Access Link","remove_all_share_caution":"Are you sure you want to remove all shared folders?","remove_share_caution":"Are you sure you want to remove the shared folder?","user_manage_tips":"For some protocols ( {protos} ), each shared folder can have independent user permissions set.","set_password_title":"Change Password","remove_all_user_caution":"Are you sure you want to remove all users?","remove_user_caution":"Are you sure you want to remove the user?","already_user":"user already exists","eject_disk_caution":"Are you sure you want to eject the disk? If someone is using files you shared, browsing, uploading, and downloading will break.","share_path_label":"Share Path","share_proto_label":"Share Protocol","other_share_proto_btn":"Add Extra Protocol","free_space":"$$$$ free of $$$$","later_add_btn":"Add Later","fast_share_btn":"Quick Setup Share","no_disk_tips":"Please insert the storage device first","share_link_tips":"The folder has been shared. Use the following link to mount the folder as a network disk to your PC or Phone.","no_user_tips":"Please select at least one writable user or read-only user.","nfs_tips":"Disks with exFAT format cannot be shared via NFS protocol.","ftp_fat32_tips":"FTP protocol does not support writing data to FAT32 formatted disks yet.","format_th":"Format","users_limit_tips":"Only a maximum of 10 users are allowed.","serve_not_enable_tips":"You have not opened the NAS file sharing agreement, until you do, the access link will not take effect.","fat32_warning":"FAT format disks are less compatible with large files, it is recommended to use exFAT format.","limit_share_folder_tips":"Add up to {count} of shared folders, and additional sharing protocols can be added to each shared folder."},"menu_nasview":"Network Storage","upgrade":{"online":"Online Upgrade","compile_time":"Compile Time","keep_setting":"Keep Settings","keep_installed":"Keep Installed Packages","local":"Local Upgrade","firmware_verification":"Firmware Verification","version":"Version","verifi_res":"Verification Result","auto":"Auto Upgrade","enable_auto":"Enable Auto Upgrade","router_time":"Router Time","auto_time":"Auto Upgrade Time","checking":"Verifying","pass":"Pass","firmware_large":"The uploaded file is too large.","no_firmware":"The firmware does not exist.","unpass":"Failed","not_supported":"Uploaded version is not supported","platform_unpass":"The firmware is not compatible with this device.","not_gl":"This is not official released firmware.","old_version":"The uploaded firmware version is older than the current version.","advised_not_keep_setting":"Kernel version will be upgraded. You are advised not to retain your current settings.","unknown_version":"This is an unknown version, is 3rd-party firmware or the version is old.","updating":"Upgrading","update_fail":"Upgrade failed","firmware_type":"Firmware Type","unknown_error":"Unknown error.","firmware_downloading":"Firmware Downloading…","download_success":"Download Successful!","download_failed":"Download failed.","release_note_btn":"Release Notes","firmware_up_to_date":"Firmware is up-to-date.","current_firmware_title":"Current Firmware","new_firmware_title":"New Firmware","online_upgrading_title":"Online Upgrading","sysupgrade_test_failed":"Testing the firmware with sysupgrade failed.","keep_setting_tips":"If this option is enabled, current settings will be retained and you will be prompted to reinstall any User installed packages after the upgrade has completed.","available_update_title":"Upgrade Reminder","later_btn":"Later","ignore_text_btn":"Ignore This Upgrade","new_rc_firmware_title":"RC Firmware","accepted_rc_tips":"You have accepted the firmware preview plan. Please contact us if you encounter any issues.","preview_version_title":"Preview Version","accept_preview_label":"Accept Preview Plan","rc_version_enable_tips":"If this option is enabled, you can try new features before the final version is issued and provide us with feedback. Note that these upgrades may not be stable. Please check $$$$ What's New? $$$$ for the latest firmware features.","rc_version_disable_tips":"Please note that disabling this option will not automatically return your firmware to a stable version. If you need to use a stable version of the firmware, please go to $$$$The Download Center $$$$.","check_online_err_msg":"{code}，the online upgrade is abnormal."},"menu_upgrade":"Upgrade","menu_parentalcontrol":"Parental Control","parental":{"enable_lable":"Enable Parental Control","enable_auto_update_label":"Enable Auto Update of Feature Library","drop_anonymous_label":"Block WAN for Unmanaged Devices","view_anonymous_btn":"View Unmanaged Devices","anonymous_title":"Unmanaged Devices","group_name_label":"Profile Name","edit_group_title":"Modify Profile","remove_group_tips":"Are you sure you want to delete the profile?","remove_rule_tips":"Are you sure you want to delete the ruleset?","remove_schedule_tips":"Are you sure you want to delete the schedule?","manual_add_mac_title":"Manually Add Device","drop_label":"Block Internet Access","drop_desc":"Drop all Internet connections","accept_label":"No Limit","accept_desc":"Accept all Internet connections","remove_rule_err_default_msg":"Unable to delete a ruleset if it is the default ruleset for any profile. Please check your profiles.","remove_rule_err_using_msg":"Unable to delete a ruleset if it is a temporary ruleset for any profile. Please check your profiles.","group_title":"Profiles","group_desc":"You can create a profile for each of your children and add the client devices that they use. Then you can set different schedules within each profile based on the learning times, bedtimes etc. that you have set for them. These schedules will control which websites and applications the devices in the device group can access at the times you have specified.","device_type_th":"Device Type","device_name_th":"Device Name","no_device_label":"No Device","next_schedule_tips":"Switch to {rule} after {time}","brief_title":"Set Temporary Ruleset","brief_tips":"Any set schedules will not take effect until the temporary ruleset is stopped.","brief_label":"Temporary switch to","brief_duration_tips":"Duration {time}","add_group_step1_title":"1. Create a profile for your child or family","add_group_step2_title":"2. Select the devices to be managed","add_group_step3_title":"3. Set access limits for these devices","add_group_step4_title":"4. Go to set schedules","add_group_step1_desc":"First, select the client devices used by your children or your family, depending upon whether you want to control network access to all devices for your entire family or whether you want to control access for each child separately. After that, you can","add_group_step1_desc_point1":"1. block access to the Internet from all devices of your choice;","add_group_step1_desc_point2":"2. limit access to specific applications or sites to all devices of your choice.","add_group_step1_tips":"You can name these devices, giving them a name that is easy to remember. If created for a specific child, you could use the child's name or nickname.","add_group_step2_desc":"You should first connect these devices to the router as clients. Otherwise you will need to enter the individual MAC addresses manually.","add_group_step3_desc":"Next, you can set how to limit access to the Internet for these devices.","add_group_step3_desc_point1":"1. you can prevent these devices from connecting to the Internet and then pause the restriction at a specific time;","add_group_step3_desc_point2":"2. you can also block access from these devices to specific applications or Internet sites to prevent your child from accessing or viewing content that you consider is not suitable for them.","add_group_step3_tips":"You can create a new ruleset to block applications or sites that you do not want to be accessed.","add_group_step4_tips":"You have successfully created a profile!","add_group_step4_desc":"If you need to specify a more detailed schedule for your child or your family, to include times for study, times for playing games or when it is time for bed; you can make additional schedule settings.","default_rule_label":"Default Ruleset","add_rule_btn":"Add a New Ruleset","later_btn":"Later","finish_btn":"Finish","to_set_btn":"Go to Set","edit_group_desc":"Each client device can only be assigned to one profile. If you add a client device to another profile, it will be removed from the original one.","device_title":"Devices","add_device_btn":"Manage Device","add_device_tips":"Please select the client device that belongs to your child or family, e.g. kid's mobile phone, tablet, games console. Please note that each client device can only be assigned to one profile.","schedule_title":"Schedules","add_schedule_btn":"Add Schedule","add_schedule_tips":"You can set up special time slots during which the device will be subject to additional restrictions. For example, you can define playtimes where you allow your child to play; free time slots at weekends or times when your child needs to take a break.","schedule_rule_label":"Schedule Ruleset","execution_time_label":"Execution Time","time_to_label":"{time} to {time}","execution_day_label":"Execution Day(s)","day_err_msg":"Please select an execution day(s).","time_err_msg":"End time must be at least 15 minutes later than the start time.","day_conflict_err_msg":"Other schedules already exist for {day} between {begin} and {end}, please remove them first.","time_conflict_err_msg":"Other schedules already exist for between {begin} and {end}, please remove them first.","begin_time_label":"Start Time","end_time_label":"End Time","stop_brief_btn":"Stop Temporary Ruleset","manual_stop_brief_label":"Until Manual Stop","brief_stop_time_label":"Stop Time","rule_desc":"You can define rulesets for specific time periods, to limit which websites and apps your child is allowed access to. For example, \"learning time\" does not allows access to specific video websites or apps.","rule_title":"ruleset","rule_tips":"You can assign the ruleset that is to be used at which time period in the schedule of each profile.","rule_name_th":"Ruleset Name","rule_drop_count_tips":"Block access to {count} sites","system_badge":"system","add_rule_title":"Add a New Ruleset","edit_rule_title":"Modify Ruleset","rule_color_label":"Color","rule_drop_app_label":"Block Application & Sites","aim_type_label":"Social","game_type_label":"Game","video_type_label":"Video","shop_type_label":"Shopping","music_type_label":"Music","job_type_label":"Recruitment","download_type_label":"Download","portal_type_label":"Web Portal","default_rule_tips":"Unless you set a schedule, the router will limit access to all client devices in the profile by enforcing this rule.","current_rule_label":"Current Ruleset:","del_all_schedule_btn":"Delete All Schedules","remove_all_schedule_tips":"Are you sure you want to delete all the schedules?","version_conversion_btn":"Switch Version","toggle_version_desc":"You can select the version of the parental control feature you want to use as needed. Both versions of Parental Controls cannot be enabled at the same time, and the another one will be automatically disabled when you switch versions.","local_version_title":"Local Version","local_version_desc":"The local version is provided by GL.iNet. It is currently in beta, so there is no additional cost. In this version, if you need to filter requests by application, you need to enter the domain manually.","bark_version_desc":"The Bark version, which is provided and managed by $$$$Bark$$$$ on their own platform, offers the option to filter applications and websites with a single click and monitor request history. Please be aware that an additional subscription fee is payable directly to Bark for this service.","bark_version_title":"Bark Version"},"bark":{"desc":"Depending on the subscription you choose (Bark or BarkJr), you'll be able to:","unbound_tips":"The Bark service is enabled, but this device is not yet paired with any account. Please use the $$$$Device Pairing Link$$$$ to pair this device with your Bark account.","online_tips":"The device is connected to Bark Cloud Services and paired with an account. Please $$$$Go to Bark$$$$ and log in to the paired account to control access.","enable_ipv6_label":"Enable IPv6","note_tips":"Bark's service may not be available in certain countries. As GL.iNet is not the provider of this service, should you encounter any issues using Bark kindly reach out directly to $$$$Bark's Technical Support$$$$ for assistance.","force_dns_enable_tips":"Bark blocks almost all DNS requests from clients sent to the Internet. Please $$$$ Go to DNS Page$$$$ disable {label} option to avoid your clients not be able to access the Internet.","visit_tips":"Visit $$$$bark us$$$$to learn more and sign up today for afree,one-week trial.","feature_tips1":"Set parental controls on all of theinternet-connected devices in your home.","feature_tips2":"Set daily bedtimes and school times on all your child's devices to limit online distractions","feature_tips3":"Choose which websites and apps areallowed/blocked on all devices","feature_tips4":"Monitor your child'stexts, email, and 30+ social media platforms and apps for signs of digital dangers","pairing_code_label":"Pairing Code","unbind_btn":"Re-pair","unbind_tips":"Are you sure you want to reset the pairing code to re-pair the device to another account? Note that this action will not remove the device from the currently paired account.","weight_desc":"Bark's award-winning service can help protect your child's digital world and provide comprehensive online protection."},"plugins":{"update":"Update","install":"install","uninstall":"uninstall","no_packages":"No software packages","free_space":"Free space:","filter":"Filter","search_package":"Search Package","name":"Name","version":"Version","size":"Size","action":"Action","confirm_uninsatll_dependency":"Remove dependencies","all":"All","no_install":"Not installed","installed":"Installed","available_update":"Available Update","user_retention":"Reserved","install_success":"Installation succeeded","install_faile":"Installation failed","uninstall_success":"Uninstallation succeeded","uninstall_faile":"Uninstallation failed","package_info":"Packs Info","go":"Go","uninstall_caution":"Are you sure you want to uninstall","tips":"Failed to update repository list, please check your network and try again.","system":"system","system_tip":"The software package is part of the router's base system and cannot be uninstalled.","time_last_update":"Last Refresh Time:","loading_tips":"The list is Refreshing, please wait...","edit_sources_btn":"Manage Sources","add_sources_tips":"The compressed format of all software sources is src/gz.","add_sources_title":"Add Custom Software Source"},"menu_plugins":"Plug-ins","timezone":{"router_time":"Router Time","differ_time":"The time zone of the router is different from that of your browser.","sync":"Sync"},"menu_timezone":"Time Zone","welcome":{"choose_lang":"Choose Your Language","next":"Next","back":"Back","submit":"Submit","set_pwd":"Set Up Your Admin Password","new_pwd":"New Password","new_pwd_placeholder":"Please enter password","confirm_pwd":"Confirm Password","confirm_pwd_placeholder":"Must be identical to above","unknown_err_msg":"Wi-Fi is turned off during router initialization, please check that your client device has reconnected to the router."},"home":{"reboot":"Reboot","logout":"Logout","default":"default","dark":"Dark","language":"language","theme":"Theme","footer":{"copyright":"Copyright","desc":"All Rights Reserved"},"no_internet":"No Internet Connection! Find a network to reconnect.","reboot_warning":"Are you sure you want to reboot your router?","classic":"Classic","custom_lang_btn":"Add Languages","custom_lang_title":"Management Interface Languages","custom_lang_tips":"The official language packs are English and Chinese. (Other languages are maintained by our community, GL.iNet cannot guarantee the completeness or quality of them.) The latest language packs will be obtained from our repository when you click \"Update\".","custom_lang_note":"Unselected language packs will be deleted (except English).","enable_update_langs_label":"Enable Auto Update","update_time_label":"Update Time","langs_no_internet_tips":"Failed to update language list. {otherTips}"},"menu_applications":"Applications","menu_network":"Network","menu_system":"System","menu_vpn":"VPN"}