{ "gl-x3000": { "release": { "4.3.5": { "release_note": { "BUG fix": [ "Add configuration for cellular IPV6 TTL.", "Improve logic configuration for SIM cards.", "Fixed address allocation issue in extender mode." ] }, "version": "4.3.5" }, "4.3.4": { "release_note": { "BUG fix": [ "Add IPV6 passthrough features.", "Add display for 5G NSA, 5G SA, and 4G+.", "Fix the issue of incorrect signal strength in NSA mode.", "Fix the issue where the module incorrectly displays dl_bandwidth and ul_bandwidth.", "Optimized Cellular settings interface interaction." ] }, "version": "4.3.4" }, "4.3.3": { "release_note": { "BUG fix": [ "Fix TMO failover.", "Fix SIM configuration loss.", "Add the display of web 4G+ signal.", "Optimize the configuration for dual SIM cards.", "Optimize dual SIM card switching.", "Add cellular modem MTU configuration option.", "Fix TTL configuration confusion.", "Correct abnormal display on the relay page.", "Fix 2.4G forced to use 20MHz bandwidth setting.", "Ensure AdGuard Home processes client requests after enabling bypass routing.", "Resolve an issue where parental control could not control video streaming.", "Ensure parental control rules prohibiting domain name/IP are effective when accessing Google Chrome.", "Fix issue where WDS mode switches back to routing mode and device cannot obtain an IP address.", "Remove cellular modem soft restart.", "Remove ipv6 passthrough." ] }, "version": "4.3.3" }, "4.3.1": { "release_note": { "BUG fix": [ "Resolved an issue where the parental control function was unable to control video streaming.", "Fixed an issue where the cellular was unable to access the internet after updating its IP address.", "Fixed an issue where the cellular's TTL setting was not working properly.", "Resolved an issue where VPN second connection was failing.", "Repaired an LED display abnormality that occurred after switching SIM cards." ], "Improvements": [ "Optimized the display of the date for timed tasks.", "Optimized the display of frequency band filtering in the cellular network configuration." ] }, "version": "4.3.1" } } }, "gl-s200": { "release": { "4.1.4": { "release_note": { "BLE": [ "Add extended scan and sync periodic adv.", "Fix some bugs." ], "Thread": [ "Improve GSDK(https://github.com/SiliconLabs/gecko_sdk/releases) version to v4.2.3.", "Improve the GL DEV BOARD firmware to v1.1.11.", "Improve Thread network configuration parameters.", "Add Wi-Fi onoff toggle button." ], "Other": [ "We are proud to announce that the GL-S200(https://www.gl-inet.com/products/gl-s200/) is Thread certified." ] }, "version": "4.1.4" } } }, "gl-mt3000": { "release": { "4.2.3": { "release_note": { "Bug Fixes": [ "Fixed the problem that after the MT3000 relays the 160M Hz hotspot, the AP becomes 20M.", "Fixed the problem that the AX/AXT1800 cannot access the AP itself after relaying the DFS 140 channel.", "Fixed the problem that parental control cannot block blacklist websites in newer browsers.", "Fixed the externder working mode, the superior cannot ping the subordinate.", "Fixed the problem that openvpn port forwarding fails after the reserved configuration is upgraded.", "Fix the problem that mqtt cannot report SSID.", "Fixed the problem that ddns occasional interface return error.", "Fixed The relay cannot connect to Huawei TC7102 160MHz 5GWiFi.", "Fix single sim card slot does not return dual sim card slot information.", "Fixed the problem that after the adguardhome function is turned on on the A1300 and the adguardhome is turned off, the visitor has no network.", "Fixed the problem that Openvpn Server and wireguard Server shut down remote access to the LAN subnet, but the Openvpn and wireguard clients can still access the IP address of the PC on the LAN side of the server.", "Fixed the AP bridge mode, the bridge is not successful. The address assigned by the superior cannot be obtained.", "Support-EM160R-EM060K-EM120K-RM520N-modem.", "Fixed the problem that A1300 cannot recognize USB3.0 external modem.", "Fixed the problem of abnormal equipment caused by the time zone or 160M bandwidth issued by the GoodCloud.", "Correct the display problem of the LED light in the unconnected network mode.", "Fixed the problem of unsuccessful dialing using external modem, QMI and QCM protocol dialing.", "Roll back MTK SDK from v7.6.7.0 to v7.6.6.1." ] }, "version": "4.2.3" }, "4.2.2": { "release_note": { "Bug Fixes": [ "Fixed the problem where the openvpn cannot resolve DNS after restarting openvpn after keeping settings upgrade.", "Fixed the problem where the status cannot be displayed correctly when the external modem is connected using the 3G protocol.", "Fixed a BUG where clients could not access the internet after failover.", "Fixed some UI display exceptions." ], "Software Upgrade": [ "Upgraded MTK SDK from v7.6.6.1 to v7.6.7.0" ] }, "version": "4.2.2" }, "4.2.1": { "release_note": { "Bug Fixes": [ "Fixed a problem where the WiFi configuration page showed unavailable channel options.", "Fixed a problem where NordVPN could not resolve DNS after keeping settings upgrade.", "Fixed a problem where GL-MT3000 failed to recognize USB3.0 modem.", "Fixed a problem where the IPV6 rate limiting does not take effect.", "Fixed a problem where GL-MT3000 failed to repeat to iPhone 13 and TP-LINK ACR700.", "Fixed a memory leak problem in GL-MT3000 when using QCM protocol.", "Fixed a probabilistic issue where GL-MT3000 could not apply OpenVPN username and password." ], "Optimizations": [ "Disabled nginx access logs.", "Optimized the MWAN3 online detection threshold.", "Optimized the synchronization of configuration files in abnormal situations.", "Optimized the repeater scan time of GL-MT3000." ], "Software Upgrade": [ "Upgraded AdguardHome to V0.107.26." ] }, "version": "4.2.1" }, "4.2.0": { "release_note": { "Language": [ "Added German language." ], "New feature": [ "Added Parental Control feature.", "Added Zerotier feature.", "Added Tailscale feature.", "Added Clear Traffic Statistics button for in client page.", "Added DHCP Gateway option for LAN.", "Added SSID Visibility option for guest Wi-Fi.", "Added support for GoodCloud alerts when new clients join.", "Added support for comments for domain and IP profiles in VPN policy." ], "Optimization": [ "Improved IPv6 LAN Mode options. Separates the native and passthrough modes.", "Improved the results and hints of the DDNS test.", "Improved drop-in gateway feature with DHCP-based solution to increase stability.", "Improved LED lighting logic to ensure consistency with the UI.", "Improved interaction for MAC address cloning.", "Improved networking status alerts in Internet page.", "Improved interface tracking settings description for Multi-WAN.", "Improved login page with automatic focus to password input box.", "Improved VPN client configuration file view with files sorted by name.", "Improved the switch name in the VPN global options for whether the GL.iNet service uses VPN or not.", "Improved the interaction of set read-only users to read-write users in network storage.", "Improved ADGuard Home feature to support seeing which client the request is coming from." ] }, "version": "4.2.0" }, "4.1.3": { "release_note": { "Modem": [ "Fix EG25/EC25/EC20 modems qmi dial-up failure" ], "Repeater": [ "Fix the problem of low speed", "Fix scan disconnection issue" ], "Wifi": [ "Fix the problem that some channels of wifi in Germany are not displayed" ] }, "version": "4.1.3" }, "4.1.2": { "release_note": { "Internet": [ "Add support for EM160R/EM060k/EM120K/RM520N/E3372/E3276/QD91F modems" ], "Network": [ "Fix portal page jump before setup device" ], "Repeater": [ "Fix deleting saved Wi-Fis will cause crash", "Fix for repeating Wi-Fi with WPA2 EAP will fail", "Fix the Wi-Fi events could not be monitored on reboot", "Fix repeating first connection after reboot will prompt password error" ], "VPN": [ "Add VPN Cascading feature" ] }, "version": "4.1.2" } } }, "gl-mt2500": { "release": { "4.2.3": { "release_note": { "Bug Fixes": [ "Fixed the problem that after the MT3000 relays the 160M Hz hotspot, the AP becomes 20M.", "Fixed the problem that the AX/AXT1800 cannot access the AP itself after relaying the DFS 140 channel.", "Fixed the problem that parental control cannot block blacklist websites in newer browsers.", "Fixed the externder working mode, the superior cannot ping the subordinate.", "Fixed the problem that openvpn port forwarding fails after the reserved configuration is upgraded.", "Fix the problem that mqtt cannot report SSID.", "Fixed the problem that ddns occasional interface return error.", "Fixed The relay cannot connect to Huawei TC7102 160MHz 5GWiFi.", "Fix single sim card slot does not return dual sim card slot information.", "Fixed the problem that after the adguardhome function is turned on on the A1300 and the adguardhome is turned off, the visitor has no network.", "Fixed the problem that Openvpn Server and wireguard Server shut down remote access to the LAN subnet, but the Openvpn and wireguard clients can still access the IP address of the PC on the LAN side of the server.", "Fixed the AP bridge mode, the bridge is not successful. The address assigned by the superior cannot be obtained.", "Support-EM160R-EM060K-EM120K-RM520N-modem.", "Fixed the problem that A1300 cannot recognize USB3.0 external modem.", "Fixed the problem of abnormal equipment caused by the time zone or 160M bandwidth issued by the GoodCloud.", "Correct the display problem of the LED light in the unconnected network mode.", "Fixed the problem of unsuccessful dialing using external modem, QMI and QCM protocol dialing.", "Roll back MTK SDK from v7.6.7.0 to v7.6.6.1." ] }, "version": "4.2.3" }, "4.2.1": { "release_note": { "Bug Fixes": [ "Fixed a problem where the WiFi configuration page showed unavailable channel options.", "Fixed a problem where NordVPN could not resolve DNS after keeping settings upgrade.", "Fixed a problem where GL-MT3000 failed to recognize USB3.0 modem.", "Fixed a problem where the IPV6 rate limiting does not take effect.", "Fixed a problem where GL-MT3000 failed to repeat to iPhone 13 and TP-LINK ACR700.", "Fixed a memory leak problem in GL-MT3000 when using QCM protocol.", "Fixed a probabilistic issue where GL-MT3000 could not apply OpenVPN username and password.", "Fixed switch button not taking effect when parental control is enabled on GL-A1300.", "Fixed a BUG where clients could not access the internet after failover." ], "Optimizations": [ "Disabled nginx access logs.", "Optimized the MWAN3 online detection threshold.", "Optimized the synchronization of configuration files in abnormal situations.", "Optimized the repeater scan time of GL-MT3000." ], "Software Upgrade": [ "Upgraded AdguardHome to V0.107.26." ] }, "version": "4.2.1" }, "4.2.0": { "release_note": { "Language": [ "Added German language." ], "New feature": [ "Added Parental Control feature.", "Added Zerotier feature.", "Added Tailscale feature.", "Added Clear Traffic Statistics button for in client page.", "Added DHCP Gateway option for LAN.", "Added SSID Visibility option for guest Wi-Fi.", "Added support for GoodCloud alerts when new clients join.", "Added support for comments for domain and IP profiles in VPN policy." ], "Optimization": [ "Improved IPv6 LAN Mode options. Separates the native and passthrough modes.", "Improved the results and hints of the DDNS test.", "Improved drop-in gateway feature with DHCP-based solution to increase stability.", "Improved LED lighting logic to ensure consistency with the UI.", "Improved interaction for MAC address cloning.", "Improved networking status alerts in Internet page.", "Improved interface tracking settings description for Multi-WAN.", "Improved login page with automatic focus to password input box.", "Improved VPN client configuration file view with files sorted by name.", "Improved the switch name in the VPN global options for whether the GL.iNet service uses VPN or not.", "Improved the interaction of set read-only users to read-write users in network storage.", "Improved ADGuard Home feature to support seeing which client the request is coming from." ] }, "version": "4.2.0" } } }, "gl-a1300": { "release": { "4.2.3": { "release_note": { "Bug Fixes": [ "Fixed the problem that after the MT3000 relays the 160M Hz hotspot, the AP becomes 20M.", "Fixed the problem that the AX/AXT1800 cannot access the AP itself after relaying the DFS 140 channel.", "Fixed the problem that parental control cannot block blacklist websites in newer browsers.", "Fixed the externder working mode, the superior cannot ping the subordinate.", "Fixed the problem that openvpn port forwarding fails after the reserved configuration is upgraded.", "Fix the problem that mqtt cannot report SSID.", "Fixed the problem that ddns occasional interface return error.", "Fixed The relay cannot connect to Huawei TC7102 160MHz 5GWiFi.", "Fix single sim card slot does not return dual sim card slot information.", "Fixed the problem that after the adguardhome function is turned on on the A1300 and the adguardhome is turned off, the visitor has no network.", "Fixed the problem that Openvpn Server and wireguard Server shut down remote access to the LAN subnet, but the Openvpn and wireguard clients can still access the IP address of the PC on the LAN side of the server.", "Fixed the AP bridge mode, the bridge is not successful. The address assigned by the superior cannot be obtained.", "Support-EM160R-EM060K-EM120K-RM520N-modem.", "Fixed the problem that A1300 cannot recognize USB3.0 external modem.", "Fixed the problem of abnormal equipment caused by the time zone or 160M bandwidth issued by the GoodCloud.", "Correct the display problem of the LED light in the unconnected network mode.", "Fixed the problem of unsuccessful dialing using external modem, QMI and QCM protocol dialing.", "Roll back MTK SDK from v7.6.7.0 to v7.6.6.1." ] }, "version": "4.2.3" }, "4.2.1": { "release_note": { "Bug Fixes": [ "Fixed a problem where the WiFi configuration page showed unavailable channel options.", "Fixed a problem where NordVPN could not resolve DNS after keeping settings upgrade.", "Fixed a problem where GL-MT3000 failed to recognize USB3.0 modem.", "Fixed a problem where the IPV6 rate limiting does not take effect.", "Fixed a problem where GL-MT3000 failed to repeat to iPhone 13 and TP-LINK ACR700.", "Fixed a memory leak problem in GL-MT3000 when using QCM protocol.", "Fixed a probabilistic issue where GL-MT3000 could not apply OpenVPN username and password.", "Fixed switch button not taking effect when parental control is enabled on GL-A1300.", "Fixed a BUG where clients could not access the internet after failover." ], "Optimizations": [ "Disabled nginx access logs.", "Optimized the MWAN3 online detection threshold.", "Optimized the synchronization of configuration files in abnormal situations.", "Optimized the repeater scan time of GL-MT3000." ], "Software Upgrade": [ "Upgraded AdguardHome to V0.107.26." ] }, "version": "4.2.1" }, "4.2.0": { "release_note": { "Language": [ "Added German language." ], "New feature": [ "Added Parental Control feature.", "Added Zerotier feature.", "Added Tailscale feature.", "Added Clear Traffic Statistics button for in client page.", "Added DHCP Gateway option for LAN.", "Added SSID Visibility option for guest Wi-Fi.", "Added support for GoodCloud alerts when new clients join.", "Added support for comments for domain and IP profiles in VPN policy." ], "Optimization": [ "Improved IPv6 LAN Mode options. Separates the native and passthrough modes.", "Improved the results and hints of the DDNS test.", "Improved drop-in gateway feature with DHCP-based solution to increase stability.", "Improved LED lighting logic to ensure consistency with the UI.", "Improved interaction for MAC address cloning.", "Improved networking status alerts in Internet page.", "Improved interface tracking settings description for Multi-WAN.", "Improved login page with automatic focus to password input box.", "Improved VPN client configuration file view with files sorted by name.", "Improved the switch name in the VPN global options for whether the GL.iNet service uses VPN or not.", "Improved the interaction of set read-only users to read-write users in network storage.", "Improved ADGuard Home feature to support seeing which client the request is coming from." ] }, "version": "4.2.0" }, "4.1.2": { "release_note": { "Network": [ "Fix portal page jump before setup device", "Fix ddns detection error" ], "Repeater": [ "Fix deleting saved Wi-Fis will cause crash", "Fix for repeating Wi-Fi with WPA2 EAP will fail", "Fix the Wi-Fi events could not be monitored on reboot", "Fix repeating first connection after reboot will prompt password error" ], "VPN": [ "Add VPN Cascading feature" ] }, "version": "4.1.2" }, "4.1.0": { "version": "4.1.0", "release_note": { "UI": [ "1. Optimize the structure of the side feature menu bar.", "2. Fix the occasional error message." ], "Internet": [ "1. Add VLAN ID setting entry in PPPoE mode.", "2. Fix unplugging the cable in Static mode will reset the static IP Settings." ], "Nginx": [ "1. Fix Nginx memory leak." ], "Repeater": [ "1. Fix issue to ensure that deleting saved Wi-Fis does not cause crash.", "2. Fix for repeating Wi-Fi with WPA2 EAP will fail.", "3. Add error message that repeating fails due to MAC Clone" ], "Wireless": [ "1. Fix occasional non-broadcast of Guest Wi-Fi after router reboot.", "2. Fix incorrect display of Guest Wi-Fi in Bridge/AP/Extender/WDS mode.", "3. Fix memory leaks.", "4. Fix Guest Wi-Fi will fail when repeating." ], "Clients": [ "1. Add device type and name modification feature.", "2. Add device list sorting feature.", "3. Optimize the speed display to show the average speed of the last 3 minutes." ], "VPN": [ "1. Add Tor feature.", "2. Optimize the display of the proxy mode switch button to make it more eye-catching.", "3. Added a wizard to setup VPN Client.", "4. Add the start VPN button to the list of configuration files on the VPN Client page.", "5. Add the restriction rule to prevent the upload of OpenVPN configuration files with different encryption methods to the same group.", "6. Fix uploading larger zip files that would fail.", "7. Add a limit on the number of configuration files within an upload zip file, not more than 1000 per zip file.", "8. Fix the failure to add the same routing rule as the deleted one.", "9. Add error message for failure to decompress uploaded files." ], "GoodCloud": [ "1. Fix multiple MQTT processes appearing.", "2. Fix router cannot refresh the binding information after GoodCloud is bound.", "3. Fix RTTY cannot connect." ], "Network Storage": [ "1. Add quick setup share feature.", "2. Fix the WAN interface not getting the address due to network storage.", "3. Add support for exFAT" ], "Network": [ "1. Add Multi-WAN feature.", "2. Add IGMP Snooping feature.", "3. Fix DDNS not working in Bridge/AP/Extender/WDS mode.", "4. Fix the Extender mode does not work when Override DNS Settings for All Clients is enabled.", "5. Fix WDS mode not working when WAN port is used as LAN port.", "6. Fix the WAN/LAN mode of WAN port can not be switched in MAC Clone status.", "7. Fix Wi-Fi exception after modifying the LAN IP.", "8. Fix for IPv6 settings being lost when upgrading firmware with kept settings." ], "System": [ "1. Add Overview feature.", "2. Add Scheduled Tasks feature.", "3. Add reminder dialog for new version upgrade.", "4. Fix web logout exception after synchronization timezone." ] } } } }, "gl-ap1300": { "release": { "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.103": { "version": "3.103", "release_note": {} } } }, "gl-ar150": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.017": { "version": "3.017", "release_note": { "New features": [ "OpenWrt Updated to version 18.06.", "Adopted new user-interface.", "WireGuard Server/Client pre-installed, supports Azirevpn and Mullvad service providers.", "Support DNS over TLS from Cloudflare.", "Support multiple web admin panel display languages.", "Added GL Cloud.", "Added new DDNS function.", "Added client management feature which includes QoS, traffic statistics and offline client.", "Added firewall settings page which includes port forwards, open port and DMZ.", "Added static IP address binding in LAN IP settings.", "Added Hide SSID option in wireless settings.", "Added guest Wi-Fi network.", "Added Keep Installed Packages option in firmware upgrade." ], "Fixed": [ "Fixed safety vulnerability.", "Removed UPnP server, PPTP and L2TP." ] } } } }, "gl-ar300m": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.104": { "version": "3.104", "release_note": { "New features": [ "Added site to site.", "Added one-click channel optimization function.", "Added app status interface.", "Added DNS encryption function.", "Added Tor function (currently support custom installation).", "Added Internet Kill Switch function.", "Added default kernel package 'kmod-nf-nathelper' to solve the problem that FTP server cannot be found." ], "Fixed problem": [ "Tcpdump unable to catch ingree data problem.", "Tethering problem with Samsung 10.", "Fixed the problem that the web panel is unable to access due to 443,83,80 port settings of vpn server.", "Fixed PPP CVE-8597 CVE-7982 security vulnerability." ], "Improvements": [ "Removed gl-autoupkg(auto reinstall ipk function), change from keep installed packages to keep installed packages list. Auto upgrade and cloud upgrade will save this list by default, users can choose the package they want to keep via admin panel.", "Optimized Wireguard auto-reconnect function.", "Optimized the vpn conflict testing.", "Optimized the port forwarding function." ], "Others": [ "Changed tx power value to display by level.", "Disabled ipv6 function by default due to leak problem.", "Optimized wireless rate from setting mode to working mode and bandwidth mode.", "Modified the name of server zone." ] } }, "3.024": { "version": "3.024", "release_note": { "New features": [ "Added pre-installed cloud/ddns soft packages", "Added IP Address Range in LAN IP page", "Added connecting hidden SSIDs function", "Added firmware compile time in upgrade page", "Added Captive Portal", "Added VPN Policies", "Added new support modem MC7430", "Supported batch setup on cloud" ], "Fixed": [ "Removed company MAC address detection", "Changed to single MAC", "Changed for being compatible with AR300MD", "Fix other bugs" ] } }, "3.019": { "version": "3.019", "release_note": { "New features": [ "OpenWrt Updated to version 18.06.", "Adopted new user-interface.", "WireGuard Server/Client pre-installed, supports Azirevpn and Mullvad service providers.", "Support DNS over TLS from Cloudflare.", "Support multiple web admin panel display languages.", "Added GL Cloud.", "Added new DDNS function.", "Added client management feature which includes QoS, traffic statistics and offline client.", "Added firewall settings page which includes port forwards, open port and DMZ.", "Added static IP address binding in LAN IP settings.", "Added Hide SSID option in wireless settings.", "Added guest Wi-Fi network.", "Added Keep Installed Packages option in firmware upgrade." ], "Fixed": [ "Fixed safety vulnerability.", "Removed UPnP server, PPTP and L2TP." ] } } } }, "gl-ar750": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.027": { "New features": [ "Added guest wifi", "Added site to site", "Added keeping installed package when upgrade", "Added VPN Policies", "Added Cloud/DDNS", "Added Captive Portal", "Added static IP address binding in LAN IP settings", "Added DHCP address pool", "Added libustream-openssl modem which support download firmware and software package in https" ], "Fixed": [ "Removed company MAC address detection" ] }, "3.010": { "New features": [ "OpenWrt Updated to version 18.06.", "Adopted new user-interface.", "WireGuard Server/Client pre-installed, supports Azirevpn and Mullvad service providers.", "Support DNS over TLS from Cloudflare.", "Support various 5GHz Wi-Fi speed configurations.", "Added GL Cloud.", "Added new DDNS function.", "Added client management feature which includes QoS, traffic statistics.", "Added firewall settings page which includes port forwards, open port and DMZ." ], "Fixed": [ "Improved the stability of wireless connection.", "Removed UPnP server, PPTP and L2TP." ] } } }, "gl-ar750s": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.104": { "version": "3.104", "release_note": { "New features": [ "Added Korean.", "Added hint in vpn page." ], "Fixed problems": [ "Fixed the problem that tcpdump was unable to catch the ingree data pack.", "Fixed tethering problem with Samsung S10 phone.", "Fixed the problem that the web was unable to access due to 443,83,80 port settings of vpn server.", "Fixed PPP CVE-8597 security vulnerability.", "Fixed opkg CVE-7982 security vulnerability." ], "Improvements": [ "Optimized the vpn conflict testing.", "Optimized the port forwarding function.", "Optimized wireless rate from setting mode to working mode and bandwidth mode." ], "Others": [ "Modified the page tag.", "Disabled ipv6 function by default due to leak problem." ] } }, "3.101": { "version": "3.101", "release_note": { "New features": [ "Added hints in Tor function", "Added hint in upgrade page :'If unable to access router web panel after the firmware upgrade is complete, please try to clear the browser cache.'", "Added 'kmod-nf-nathelper' kernel package in order to solve the problem that FTP server couldn't be found" ], "Fixed": [ "Disabled the ipv6 function due to leak problem", "Fixed initialization failed problem on Tor", "Fixed the problem : Unable to access web panel when 83 port is open", "Fixed the problem : Last changed ovpn rules back to default setting after system reboot" ], "Improvements": [ "Optimized web access problem when upgrading firmware with low version", "Optimized splash screen problem when upgrading", "Optimized AR750S pictures and upgrade hints", "Optimized Japanese translation" ] } }, "3.100": { "version": "3.100", "release_note": { "New features": [ "Added Site to Site", "Added cells info", "Added app status interface", "Added DNS encryption", "Added Channel Optimization", "Added Tor function", "Added internet kill switch" ], "Fixed": [ "Removed ipk auto re-install function and changed to save ipk list", "Changed tx power to showed by levels" ], "Improvements": [ "Optimized wireguard auto reconnection", "Optimized wireguard DNS resolution failure" ] } }, "3.025": { "version": "3.025", "release_note": { "New features": [ "Added guest wifi", "Added hiding ssid and connecting hidden ssid", "Added client management feature which includes QoS, traffic statistics and offline client.", "Added compile time and release note update in firmware upgrade page", "Added firewall settings page which includes port forwards, open port and DMZ", "Added VPN Policies", "Added Captive Portal", "Added static IP address binding in LAN IP settings", "Added DHCP address pool", "Added new support modem MC7430", "Added keeping installed package when upgrade", "Added libustream-openssl modem which support download firmware and software package in https", "Added kmod-usb-storage-uas modem", "Added Flash available space in plus-in" ], "Fixed": [ "Removed company MAC address detection", "Fixed other bugs" ] } }, "3.009": { "version": "3.009", "release_note": { "New features": [ "Added bridge mode disabled reminder in Network Mode when OpenVPN or Wireguard client is activated.", "Added alert when VPN client is abnormal." ], "Fixed": [ "Optimized Wi-Fi repeater when connecting to saved network.", "Improved Wi-Fi repeater reconnection issue.", "Fixed OpenVPN data leakage.", "Fixed OpenVPN configuration file upload failure caused by file name which includes '.", "Support PiVPN configuration file.", "Fixed SSH login failure caused by admin password which includes quotation mark ' and full stop ..", "Fixed WireGuard data leakage." ] } }, "3.007": { "version": "3.007", "release_note": { "New features": [ "Added firewall function which includes port forwarding, port opening and DMZ.", "Added Qos function.", "Added traffic statistics and real-time traffic display." ], "Fixed": [ "Fixed OpenVPN configuration file upload issue of PureVPN which user cannot input username and password.", "Fixed WISP-BSSID binding which restricts the router to reconnect to other available Wi-Fi network automatically.", "Fixed 5GHz AP disappear issue when the router is in repeater mode.", "Optimized the list of Wi-Fi scan result sorting according to signal strength.", "Optimized 'Saved Networks' in WISP mode, same SSID only displays once.", "Optimized the automatic reconnection mechanism to improve the stability of WISP." ] } }, "3.003": { "version": "3.003", "release_note": { "New features": [ "Added WireGuard QR code for the easy exportation of the configuration from the router to the smart phone WireGuard Apps." ], "Improvements": [ "OpenVPN client supports configuration file with sub-folder.", "Wireless setting supports Auto channel." ], "Fixed": [ "Fixed Memory leak.", "Corrected askpass.", "Fixed the issue of software update.", "OpenVPN supports NordVPN and PureVPN configuration.", "Other minor bug fixes." ] } }, "3.001": { "version": "3.001", "release_note": {} } } }, "gl-ax1800": { "release": { "4.2.3": { "release_note": { "Bug Fixes": [ "Fixed the problem that after the MT3000 relays the 160M Hz hotspot, the AP becomes 20M.", "Fixed the problem that the AX/AXT1800 cannot access the AP itself after relaying the DFS 140 channel.", "Fixed the problem that parental control cannot block blacklist websites in newer browsers.", "Fixed the externder working mode, the superior cannot ping the subordinate.", "Fixed the problem that openvpn port forwarding fails after the reserved configuration is upgraded.", "Fix the problem that mqtt cannot report SSID.", "Fixed the problem that ddns occasional interface return error.", "Fixed The relay cannot connect to Huawei TC7102 160MHz 5GWiFi.", "Fix single sim card slot does not return dual sim card slot information.", "Fixed the problem that after the adguardhome function is turned on on the A1300 and the adguardhome is turned off, the visitor has no network.", "Fixed the problem that Openvpn Server and wireguard Server shut down remote access to the LAN subnet, but the Openvpn and wireguard clients can still access the IP address of the PC on the LAN side of the server.", "Fixed the AP bridge mode, the bridge is not successful. The address assigned by the superior cannot be obtained.", "Support-EM160R-EM060K-EM120K-RM520N-modem.", "Fixed the problem that A1300 cannot recognize USB3.0 external modem.", "Fixed the problem of abnormal equipment caused by the time zone or 160M bandwidth issued by the GoodCloud.", "Correct the display problem of the LED light in the unconnected network mode.", "Fixed the problem of unsuccessful dialing using external modem, QMI and QCM protocol dialing.", "Roll back MTK SDK from v7.6.7.0 to v7.6.6.1." ] }, "version": "4.2.3" }, "4.2.1": { "release_note": { "Bug Fixes": [ "Fixed a problem where the WiFi configuration page showed unavailable channel options.", "Fixed a problem where NordVPN could not resolve DNS after keeping settings upgrade.", "Fixed a problem where GL-MT3000 failed to recognize USB3.0 modem.", "Fixed a problem where the IPV6 rate limiting does not take effect.", "Fixed a problem where GL-MT3000 failed to repeat to iPhone 13 and TP-LINK ACR700.", "Fixed a memory leak problem in GL-MT3000 when using QCM protocol.", "Fixed a probabilistic issue where GL-MT3000 could not apply OpenVPN username and password.", "Fixed switch button not taking effect when parental control is enabled on GL-A1300.", "Fixed a BUG where clients could not access the internet after failover." ], "Optimizations": [ "Disabled nginx access logs.", "Optimized the MWAN3 online detection threshold.", "Optimized the synchronization of configuration files in abnormal situations.", "Optimized the repeater scan time of GL-MT3000." ], "Software Upgrade": [ "Upgraded AdguardHome to V0.107.26." ] }, "version": "4.2.1" }, "4.2.0": { "release_note": { "Language": [ "Added German language." ], "New feature": [ "Added Parental Control feature.", "Added Zerotier feature.", "Added Tailscale feature.", "Added Clear Traffic Statistics button for in client page.", "Added DHCP Gateway option for LAN.", "Added SSID Visibility option for guest Wi-Fi.", "Added support for GoodCloud alerts when new clients join.", "Added support for comments for domain and IP profiles in VPN policy." ], "Optimization": [ "Improved IPv6 LAN Mode options. Separates the native and passthrough modes.", "Improved the results and hints of the DDNS test.", "Improved drop-in gateway feature with DHCP-based solution to increase stability.", "Improved LED lighting logic to ensure consistency with the UI.", "Improved interaction for MAC address cloning.", "Improved networking status alerts in Internet page.", "Improved interface tracking settings description for Multi-WAN.", "Improved login page with automatic focus to password input box.", "Improved VPN client configuration file view with files sorted by name.", "Improved the switch name in the VPN global options for whether the GL.iNet service uses VPN or not.", "Improved the interaction of set read-only users to read-write users in network storage.", "Improved ADGuard Home feature to support seeing which client the request is coming from." ] }, "version": "4.2.0" }, "4.1.0": { "version": "4.1.0", "release_note": { "Clients": [ "Add device type and name modification feature", "Add device list sorting feature", "Optimize the speed display to show the average speed of the last 3 minutes" ], "GoodCloud": [ "Fix multiple MQTT processes appearing", "Fix router cannot refresh the binding information after GoodCloud is bound", "Fix RTTY cannot connect" ], "Internet": [ "Add VLAN ID setting entry in PPPoE mode", "Fix unplugging the cable in Static mode will reset the static IP Settings" ], "Network": [ "Add Multi-WAN feature", "Add IGMP Snooping feature", "Fix DDNS not working in Bridge/AP/Extender/WDS mode", "Fix the Extender mode does not work when Override DNS Settings for All Clients is enabled", "Fix WDS mode not working when WAN port is used as LAN port", "Fix the WAN/LAN mode of WAN port can not be switched in MAC Clone status", "Fix Wi-Fi exception after modifying the LAN IP", "Fix for IPv6 settings being lost when upgrading firmware with kept settings" ], "Network Storage": [ "Add quick setup share feature", "Fix the WAN interface not getting the address due to network storage", "Add support for exFAT" ], "Nginx": [ "Fix Nginx memory leak" ], "Repeater": [ "Fix issue to ensure that deleting saved Wi-Fis does not cause crash", "Fix for repeating Wi-Fi with WPA2 EAP will fail", "Add error message that repeating fails due to MAC Clone" ], "System": [ "Add Overview feature", "Add Scheduled Tasks feature", "Add reminder dialog for new version upgrade", "Fix web logout exception after synchronization timezone" ], "UI": [ "Optimize the structure of the side feature menu bar", "Fix the occasional error message" ], "VPN": [ "Add Tor feature", "Optimize the display of the proxy mode switch button to make it more eye-catching", "Added a wizard to setup VPN Client", "Add the start VPN button to the list of configuration files on the VPN Client page", "Add the restriction rule to prevent the upload of OpenVPN configuration files with different encryption methods to the same group", "Fix uploading larger zip files that would fail", "Add a limit on the number of configuration files within an upload zip file, not more than 1000 per zip file", "Fix the failure to add the same routing rule as the deleted one", "Add error message for failure to decompress uploaded files" ], "Wireless": [ "Fix occasional non-broadcast of Guest Wi-Fi after router reboot", "Fix incorrect display of Guest Wi-Fi in Bridge/AP/Extender/WDS mode", "Fix memory leaks", "Fix Guest Wi-Fi will fail when repeating" ] } }, "3.214": { "version": "3.214", "release_note": { "Important bugfix": [ "1. fix ipv6: test-ipv6.com report fail", "2. fix router policy mem leak", "3. fix \"cmnos_thread.c: 3656\" type of wifi crash" ], "New features": [ "1. supports side router setup" ] } }, "3.213": { "version": "3.213", "release_note": { "Note before upgrade": [ "Firmware verision 3.208 has possibility failing to do keep seting sysupgrade, patch system by following method:", "Method 1:", "Install the ipk named \"3208-fix-sysupgrade\" in APPLICATIONS - Plug-ins page.", "", "Method 2:", "Input the following command in terminal:", "curl -f -Ls --connect-timeout 5 https://fw.gl-inet.com/firmware/ax1800/sysup_fix -o /tmp/sysup_fix", "sh /tmp/sysup_fix" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fix usb samba wifi crash", "2. Fix keep up sysupgrade issue", "3. Fix wireguard mullvad failed", "4. Other bugs fixes" ] } }, "3.208": { "version": "3.208", "release_note": { "Optimization": [ "Add 2.4G/5G traffic and load balancing;", "Busybox: Delete MSG_DONTROUTE flag;", "AdguardHome version compatible;", "Add the log storage function;" ] } }, "3.207": { "version": "3.207", "release_note": { "Optimization": [ "Optimized memory space", "Optimized PPPoe link", "Fixed an issue where some devices could not be linked", "Optimized Repeater link" ] } } }, "test": { "3.205": { "version": "3.205", "release_note": {} } } }, "gl-b1300": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.104": { "version": "3.104", "release_note": { "New features": [ "Added a one-click channel optimization function.", "Added app status interface.", "Added DNS Encryption function.", "Added Tor function.", "Added internet kill switch function.", "Added default kernel package 'kmod-nf-nathelper' to solve the problem that FTP server cannot be found.", "Added 'dataupload' and 'ping_addr' in mqtt.", "Added WiFi Range and support for rtty.", "Added Network diagnosis on web panel." ], "Fixed problems": [ "Fixed the problem that the web panel is unable to access due to 443,83,80 port settings of the vpn server.", "Fixed PPP CVE-8597 CVE-7982 security vulnerability.", "Upgrade 'option' module to solve the problem that EP06 not work with qmi mode and EC25 can't be recognized.", "Upgrade netifd, uqmi to fix the metric error with the route table of qmi." ], "Improvements": [ "Optimized Wireguard auto-reconnect function.", "Optimized the VPN conflict testing.", "Optimized the port forwarding function.", "Upgrade wireguard, libustream, openvpn, uhttpd, dropbear." ], "Others": [ "Changed tx power value to display by level.", "Disabled ipv6 function by default due to leak problem.", "Optimized wireless rate from setting mode to working mode and bandwidth mode.", "Modified the name of server zone." ] } }, "3.027": { "version": "3.027", "release_note": { "New features": [ "Added Site to Site", "Added Separation of front and rear ends", "Added libustream-openssl module which support https firmware and package download", "Upgrade libopenssl to improve openvpn performance" ], "Fixed": [ "Removed MAC address check", "Removed gl-autoupkg ipk auto re-install function" ] } }, "3.022": { "version": "3.022", "release_note": { "New features": [ "New UI 3.0, simpler and smoother operation.", "WireGuard Client/Server pre-installed, which is compatible with third party azirevpn/mullvad service provider.", "Support DNS over TLS from Cloudflare.", "Support GL new Cloud.", "Support GL new DDNS.", "Added client management feature which includes QoS, traffic statistics and offline clients.", "Added firewall settings page which includes port forward, open port and DMZ.", "Added Hide SSID option and connecting to hidden SSID function.", "Added guest Wi-Fi network.", "Added keep installed packages when upgrade.", "Added static IP address binding and custom DHCP range.", "Added Captive Portal.", "Support multiple languages." ], "Fixed": [ "Fixed security vulnerability.", "Remove UPnP Server, PPTP, L2TP." ] } } } }, "gl-b2200": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "Based on QSDK11." ], "Security": [ "Firewall WAN input default setting was changed from Reject to DROP." ], "Software Upgrade": [ "Upgraded Stubby to 0.3.0" ], "Optimization": [ "Optimized client statistics function", "Busybox: Del MSG_DONTROUTE event" ], "APP support": [ "Supported V1.0.5" ], "Cloud support": [ "Supported Rtty SSH Access", "Supported Rtty HTTP Access", "Supported Ping tool", "Supported Traceroute tool" ], "Important bugfix": [ "Fixed tor initialization failure in some models", "Fixed the problem that when WireGuard's Allowed IPs are not set with global proxy address, router will be unable to access the internet. ", "Fixed other known issues." ] } }, "3.107": { "version": "3.107", "release_note": { "New features": [ "Support wire MESH;", "Support 2.4G/5G MESH;", "Support traffic statistics of AP/WDS/Extender;" ], "Optimization": [ "Optimizing MESH Performance;", "Optimizing MESH 'Online Upgrade';" ] } }, "3.105": { "version": "3.105", "release_note": {} } } }, "gl-s1300": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.029": { "version": "3.029", "release_note": { "New features": [ "Added site to site", "Added one-click channel optimization function", "Added VPN Policies", "Added keep installed package when upgrade", "Added libustream-openssl module which support download firmware and software package in https", "Added Flash available space in plus-in", "Added app status interface", "Added wifi coverage function", "Added DNS encryption function", "Added conflict detection, enable data analysis in the cloud, for bid disable local traffic statistics and cloud management functions" ], "Improvements": [ "Mqtt adds data reporting information, router / info adds dataupload and ping_addr", "Upgraded libopenssl to improve openvpn performance", "Optimized the domain name resolution part of the wireguard startup script", "Optimized and increase data reporting process daemon" ], "Fixed": [ "Fix some buglist", "Removed company MAC address detection" ] } }, "3.023": { "version": "3.023", "release_note": {} } } }, "gl-e750": { "release": { "3.217": { "version": "3.217", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (MIFI,X750,E750,XE300,XE300)", "2. Based on QSDK11 (AP1300)" ], "Important bugfix": [ "1. Fix account error for SMTP settings." ] } }, "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.100": { "version": "3.100", "release_note": {} } } }, "gl-mifi": { "release": { "3.217": { "version": "3.217", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (MIFI,X750,E750,XE300,XE300)", "2. Based on QSDK11 (AP1300)" ], "Important bugfix": [ "1. Fix account error for SMTP settings." ] } }, "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.029": { "version": "3.029", "release_note": { "Fix": [ "In certain case, the web Admin Panel cannot be accessed" ] } }, "3.028": { "version": "3.028", "release_note": { "New features": [ "Added site to site", "Added one-click channel optimization function", "Added VPN Policies", "Added keep installed package when upgrade", "Added libustream-openssl module which support download firmware and software package in https", "Added Flash available space in plus-in", "Added app status interface", "Added front-end networking mode icon change" ], "Fix": [ "Removed company MAC address detection" ] } }, "3.023": { "version": "3.023", "release_note": { "New features": [ "Added Italian, Japanese.", "Added guest Wi-Fi network.", "Added Hide SSID option in wireless settings.", "Support connect to hidden Wi-Fi.", "Added GL Cloud.", "Added new DDNS function.", "Added static IP address binding in LAN IP settings and custom DHCP range.", "Added Captive Portal.", "Optimize client management features which include QoS, traffic statistics and adding offline client." ], "Fixed": [ "Fixed timezone sync.", "Other minor bug fixes." ] } } } }, "gl-mt1300": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.200": { "version": "3.200", "release_note": {} } } }, "gl-mt300n-v2": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.102": { "version": "3.102", "release_note": { "New features": [ "Added Site to Site function.", "Added one-click channel optimization function.", "Added app status interface.", "Added DNS encryption function.", "Added Tor function (currently support custom installation).", "Added Internet Kill Switch function.", "Added default kernel package 'kmod-nf-nathelper' to solve the problem that FTP server cannot be found.", "Added 83 ports to support web access." ], "Fixed problems": [ "Fixed PPP CVE-8597 security vulnerability.", "Fixed opkg CVE-7982 security vulnerability.", "Updated wireless driver to fix problem of Chromebook connection." ], "Improvements": [ "Removed restrictions on network detection of wgClient and VPN clients from front end.", "Updated the date of main interface." ], "Others": [ "Disabled ipv6 function by default due to leak problem.", "Changed tx power value to display by level.", "Modified the name of server zone.", "Optimized wireless rate from setting mode to working mode and bandwidth mode." ] } }, "3.025": { "version": "3.025", "release_note": { "New features": [ "Added Italian", "Added Guest Wifi", "Added Repeater Options", "Added connecting to hidden wifi", "Added offline clients", "Added VPN Policies", "Added Remote Access", "Added Captive portal", "Added DHCP address range management" ] } }, "3.012": { "version": "3.012", "release_note": { "New features": [ "Web admin panel display language supports Japanese." ] } }, "3.011": { "version": "3.011", "release_note": { "New features": [ "OpenWrt Updated to version 18.06.", "Adopted new user-interface.", "WireGuard Server/Client pre-installed, supports Azirevpn and Mullvad service providers.", "Support DNS over TLS from Cloudflare.", "Added GL Cloud.", "Added new DDNS function.", "Added client management feature which includes QoS, traffic statistics.", "Added firewall settings page which includes port forwards, open port and DMZ.", "Added static IP address binding in LAN IP settings.", "Added Hide SSID option in wireless settings." ], "Fixed": [ "Improved the stability of wireless connection.", "Removed UPnP server, PPTP and L2TP." ] } } } }, "gl-mv1000": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": {} } } }, "microuter-n300": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } } } }, "gl-sf1200": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.206": { "version": "3.206", "release_note": { "Functional optimization": [ "Optimize wifi anti-jamming performance." ], "Software upgrade": [ "Upgraded libopenssl to 1.1.1i" ], "Important bug fix": [ "Fixed several possible wifi driver crashes.", "Fixed IPv6 cannot be used when HNAT is enabled.", "Fixed PPPOE cannot be automatically reconnected.", "Fixed RTTY frequent disconnections." ] } }, "3.204": { "version": "3.204", "release_note": { "Important bug fix": [ "Fixed the WiFi device has no network When the OpenVPN and WireGuard are used.", "Fixed the Luci hyperlink is still generated after a Luci download failure.", "Fixed other known issues." ] } }, "3.203": { "version": "3.203", "release_note": { "New features": [ "Supported OpenVPN，Wireguard, Internet Kill Switch, OpenVPN bridge, VPN IPv6, VPN Policy", "Supported S2S", "Supported Custom DNS Server" ], "Language support": [ "English", "简体中文", "繁體中文", "Deutsch", "Français", "Español", "Italiano", "日本語", "한국어", "Русский" ] } }, "3.202": { "version": "3.202", "release_note": {} } } }, "gl-sft1200": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.204": { "version": "3.204", "release_note": {} } } }, "gl-usb150": { "release": { "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3.027": { "version": "3.027", "release_note": { "Note": [ "This version cannot use Online Upgrade(automatically upgrade) due to tech issue, please follow the instruction of Local Upgrade manually." ], "New features": [ "Added Guest wifi.", "Added hiding ssid and connecting hidden ssid.", "Added client management feature which includes QoS, traffic statistics and offline client.", "Added VPN Policies.", "Added Cloud/DDNS.", "Added Captive Portal.", "Added DHCP address pool.", "Added static IP address binding in LAN IP settings.", "Added keeping installed package when upgrade.", "Added libustream-openssl modem which support download firmware and software package in https.", "Added Flash available space in plus-in.", "Added Site to Site." ], "Improvements": [ "Optimized VPN.", "Optimized lighttpd startup sequence.", "Optimized firmware upgrade.", "Optimized Cloudfare DNS using stubby." ], "Fixed": [ "Removed MAC address check." ] } }, "3.001": { "version": "3.001", "release_note": { "New features": [ "Support DNS over TLS from Cloudflare.", "Added WireGuard Client/Server.", "Added Bridge mode function.", "Support 6 display languages (English, 简体中文, 繁體中文, Deutsch, Français and Español).", "Visit Luci advanced settings in MORE SETTING -> Advanced.", "Added Plug-ins application for OpenWrt packages management.", "Clients can be blocked through the page of CLIENTS." ], "Improvements": [ "Improved back end and the stability of the router.", "Improved Repeater function and its network switching feature.", "Improved OpenVPN Client/Server." ], "Fixed": [ "Fixed the bug of manual DNS server configuration which user is not allowed to input only one DNS server." ] } }, "3.0": { "version": "3.0", "release_note": {} } } }, "gl-x1200": { "release": { "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } } } }, "gl-x300b": { "release": { "3.217": { "version": "3.217", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (MIFI,X750,E750,XE300,XE300)", "2. Based on QSDK11 (AP1300)" ], "Important bugfix": [ "1. Fix account error for SMTP settings." ] } }, "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.104": { "version": "3.104", "release_note": {} } } }, "gl-x750": { "release": { "3.217": { "version": "3.217", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (MIFI,X750,E750,XE300,XE300)", "2. Based on QSDK11 (AP1300)" ], "Important bugfix": [ "1. Fix account error for SMTP settings." ] } }, "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.105": { "version": "3.105", "release_note": { "New features": [ "Supported traffic statistics in bridge mode", "Supported OpenVPN bridge", "Supported NextDNS personal ID", "File sharing supported closing LAN sharing and supports shared folder selection", "OpenVPN server supported CHACHA20-POLY1305 encryption", "OpenVPN server supported Authentication option setting", "Wireguard server supported local network access switch", "The modem supported QCM protocol, SMS forwarding, adding Auth, Proto, TTL, and other configuration options (MIFI, X750, E750, X1200)", "Supported MCU setting (E750)", "Supported AdGuardHome (S1300)" ], "Software upgrade": [ "Openssl upgraded to 1.1.1d", "Openvpn upgraded to 2.5.0" ], "Optimization": [ "Optimized real-time traffic statistics and reduce CPU load", "Optimized MQTT", "Optimized 4G to WiFi speed (MIFI,X750,E750)", "Optimized the number of X1200 5G client connections" ], "Language": [ "Supported Russian", "Fixed the problem of incomplete and inaccurate translation of some languages" ], "UI": [ "Added VPN status indicator icon to the navigation page", "Added quick navigation to Wireguard client commercial configuration", "Removed the import method with JSON format in Wireguard client" ], "Important bug fix": [ "Fixed the problem that AdGuardHome cannot be upgraded", "Fixed MV1000 memory leak problem", "Fixed tethering problem with iOS14 system", "Fixed the problem that port 53 is exposed to the WAN after opening Override DNS Settings for All Clients", "Fixed the problem that the client of the router cannot access the address of the Wireguard server when using Wireguard client", "Fixed the problem that the Wireguard client AllowedIPs parameter does not take effect", "Fixed the problem that Mullvad WireGuard needs to manually modify the MTU to 1380", "Fixed the X1200 dual-module IP exchange problem", "Fixed the problem that some websites cannot be opened after using VPN policy (AR750S, X1200)", "Fixed other known issues" ] } }, "3,104": { "version": "3.104", "release_note": { "New features": [ "Added Tor function (currently support custom installation).", "Added Internet Kill Switch function.", "Added default kernel package 'kmod-nf-nathelper' to solve the problem that FTP server cannot be found." ], "Fixed problems": [ "Tcpdump unable to catch ingree data problem.", "Tethering problem with Samsung 10.", "Fixed PPP CVE-8597 CVE-7982 security vulnerability." ], "Improvements": [ "Optimized the vpn conflict testing.", "Optimized the port forwarding function.", "Optimized Wireguard auto-reconnect function." ], "Others": [ "Optimized wireless rate from setting mode to working mode and bandwidth mode.", "Changed tx power value to display by level.", "Fixed the problem that the web panel is unable to access due to 443,83,80 port settings of vpn server.", "Disabled ipv6 function by default due to leak problem." ] } }, "3.028": { "version": "3.028", "release_note": { "Fixed": [ "Fixed modem information reading failure due to api interface problems when using china telecom sim card." ] } }, "3.027": { "version": "3.027", "release_note": { "New features": [ "Added Guest Wifi", "Added hide ssid and connecting to hidden ssid", "Added compile time and release note in upgrade page", "Added VPN Policies", "Added Cloud/DDNS", "Added Captive Portal", "Added DHCP address pool in lan ip", "Added static ip address binding", "Added new support modem MC7430", "Added keep installed package when upgrade", "Added libustream-openssl module which support download firmware and software package in https", "Added kmod-usb-storage-uas module", "Added Flash available space in plus-in", "Added site to site" ], "Improvements": [ "Optimized PPPOE", "Optimized vpn", "Optimized gl_health", "Optimized timezone settings", "Optimized lighttpd startup sequence" ] } }, "3.004": { "version": "3.004", "release_note": {} } } }, "gl-axt1800": { "release": { "4.2.3": { "release_note": { "Bug Fixes": [ "Fixed the problem that after the MT3000 relays the 160M Hz hotspot, the AP becomes 20M.", "Fixed the problem that the AX/AXT1800 cannot access the AP itself after relaying the DFS 140 channel.", "Fixed the problem that parental control cannot block blacklist websites in newer browsers.", "Fixed the externder working mode, the superior cannot ping the subordinate.", "Fixed the problem that openvpn port forwarding fails after the reserved configuration is upgraded.", "Fix the problem that mqtt cannot report SSID.", "Fixed the problem that ddns occasional interface return error.", "Fixed The relay cannot connect to Huawei TC7102 160MHz 5GWiFi.", "Fix single sim card slot does not return dual sim card slot information.", "Fixed the problem that after the adguardhome function is turned on on the A1300 and the adguardhome is turned off, the visitor has no network.", "Fixed the problem that Openvpn Server and wireguard Server shut down remote access to the LAN subnet, but the Openvpn and wireguard clients can still access the IP address of the PC on the LAN side of the server.", "Fixed the AP bridge mode, the bridge is not successful. The address assigned by the superior cannot be obtained.", "Support-EM160R-EM060K-EM120K-RM520N-modem.", "Fixed the problem that A1300 cannot recognize USB3.0 external modem.", "Fixed the problem of abnormal equipment caused by the time zone or 160M bandwidth issued by the GoodCloud.", "Correct the display problem of the LED light in the unconnected network mode.", "Fixed the problem of unsuccessful dialing using external modem, QMI and QCM protocol dialing.", "Roll back MTK SDK from v7.6.7.0 to v7.6.6.1." ] }, "version": "4.2.3" }, "4.2.1": { "release_note": { "Bug Fixes": [ "Fixed a problem where the WiFi configuration page showed unavailable channel options.", "Fixed a problem where NordVPN could not resolve DNS after keeping settings upgrade.", "Fixed a problem where GL-MT3000 failed to recognize USB3.0 modem.", "Fixed a problem where the IPV6 rate limiting does not take effect.", "Fixed a problem where GL-MT3000 failed to repeat to iPhone 13 and TP-LINK ACR700.", "Fixed a memory leak problem in GL-MT3000 when using QCM protocol.", "Fixed a probabilistic issue where GL-MT3000 could not apply OpenVPN username and password.", "Fixed switch button not taking effect when parental control is enabled on GL-A1300.", "Fixed a BUG where clients could not access the internet after failover." ], "Optimizations": [ "Disabled nginx access logs.", "Optimized the MWAN3 online detection threshold.", "Optimized the synchronization of configuration files in abnormal situations.", "Optimized the repeater scan time of GL-MT3000." ], "Software Upgrade": [ "Upgraded AdguardHome to V0.107.26." ] }, "version": "4.2.1" }, "4.2.0": { "release_note": { "Language": [ "Added German language." ], "New feature": [ "Added Parental Control feature.", "Added Zerotier feature.", "Added Tailscale feature.", "Added Clear Traffic Statistics button for in client page.", "Added DHCP Gateway option for LAN.", "Added SSID Visibility option for guest Wi-Fi.", "Added support for GoodCloud alerts when new clients join.", "Added support for comments for domain and IP profiles in VPN policy." ], "Optimization": [ "Improved IPv6 LAN Mode options. Separates the native and passthrough modes.", "Improved the results and hints of the DDNS test.", "Improved drop-in gateway feature with DHCP-based solution to increase stability.", "Improved LED lighting logic to ensure consistency with the UI.", "Improved interaction for MAC address cloning.", "Improved networking status alerts in Internet page.", "Improved interface tracking settings description for Multi-WAN.", "Improved login page with automatic focus to password input box.", "Improved VPN client configuration file view with files sorted by name.", "Improved the switch name in the VPN global options for whether the GL.iNet service uses VPN or not.", "Improved the interaction of set read-only users to read-write users in network storage.", "Improved ADGuard Home feature to support seeing which client the request is coming from." ] }, "version": "4.2.0" }, "4.1.0": { "release_note": { "Clients": [ "Add device type and name modification feature", "Add device list sorting feature", "Optimize the speed display to show the average speed of the last 3 minutes" ], "GoodCloud": [ "Fix multiple MQTT processes appearing", "Fix router cannot refresh the binding information after GoodCloud is bound", "Fix RTTY cannot connect" ], "Internet": [ "Add VLAN ID setting entry in PPPoE mode", "Fix unplugging the cable in Static mode will reset the static IP Settings", "Add support for EM160R/EM060k/EM120K/RM520N modems" ], "Network": [ "Add Multi-WAN feature", "Add IGMP Snooping feature", "Fix DDNS not working in Bridge/AP/Extender/WDS mode", "Fix the Extender mode does not work when Override DNS Settings for All Clients is enabled.", "Fix WDS mode not working when WAN port is used as LAN port", "Fix the WAN/LAN mode of WAN port can not be switched in MAC Clone status", "Fix Wi-Fi exception after modifying the LAN IP", "Fix for IPv6 settings being lost when upgrading firmware with kept settings" ], "Network Storage": [ "Add quick setup share feature", "Fix the WAN interface not getting the address due to network storage", "Add support for exFAT." ], "Nginx": [ "Fix Nginx memory leak" ], "Repeater": [ "Fix issue to ensure that deleting saved Wi-Fis does not cause crash", "Fix for repeating Wi-Fi with WPA2 EAP will fail", "Add error message that repeating fails due to MAC Clone", "Fix repeater fails to connect with an incorrect password message after router reboot", "Fix repeater fails to connect to DFS wifi" ], "System": [ "Add Overview feature", "Add Scheduled Tasks feature", "Add reminder dialog for new version upgrade", "Add fan start-up temperature threshold setting", "Fix web logout exception after synchronization timezone" ], "UI": [ "Optimize the structure of the side feature menu bar", "Fix the occasional error message" ], "VPN": [ "Add Tor feature", "Optimize the display of the proxy mode switch button to make it more eye-catching", "Added a wizard to setup VPN Client", "Add the start VPN button to the list of configuration files on the VPN Client page", "Add the restriction rule to prevent the upload of OpenVPN configuration files with different encryption methods to the same group", "Fix uploading larger zip files that would fail", "Add a limit on the number of configuration files within an upload zip file, not more than 1000 per zip file", "Fix the failure to add the same routing rule as the deleted one", "Add error message for failure to decompress uploaded files" ], "Wireless": [ "Fix occasional non-broadcast of Guest Wi-Fi after router reboot", "Fix incorrect display of Guest Wi-Fi in Bridge/AP/Extender/WDS mode", "Fix memory leaks", "Fix Guest Wi-Fi will fail when repeating" ] }, "version": "4.1.0" }, "4.0.3": { "release_note": { "Optimize:": [ "Adjust the fan startup temperature to 75 °C" ] }, "version": "4.0.3" }, "4.0.2": { "version": "4.0.2", "release_note": { "BUG fix": [ "1. Fix the problem that the VPN Dashboard breaks when using some profiles.", "2. Fix the problem that the wireless power could not be modified in some cases.", "3. Fix the problem that the 5G channel cannot be set to 149-165.", "4. Rectify the error of collecting statistics about the size of network storage files.", "5. Fix the problem that glinet management page cannot be accessed after luci plug-in is installed.", "6. Fix unauthorized access via RTTY.", "7. Fix the problem that some SD cards cannot be identified.", "8. Fix the problem that DHCP cannot work when the name is set to empty in static IP binding.", "9. Fix the problem that MAC Clone does not support manual input.", "10. Fix the identification error of cert and key file paths when uploading OVPN configuration.", "11. Fix the problem that the 2.4G wifi cannot be set to 11b/g/n/ax mode.", "12. Fix duplicate SSID in repeater scan list.", "13. Fix the nginx file handle leak.", "14. Fix the problem that the device cannot access the internet when it is restored from bridge mode to routing mode by using the Reset button.", "15. Fix the problem that the WIFI crash when connected to 160M hotspot.", "16. Fix the problem that the DNS exception caused by the VPN policy." ], "New features": [ "1. LUCI supports Chinese by default.", "2. Supports IPV6 DDNS.", "3. Support Drop-in gateway mode.", "4. WIFI supports non-AX mode." ], "Software Upgrade": [ "1. Upgraded AdguardHome to V0.107.8" ], "System settings": [ "1. Set the fan startup temperature to 85°C" ] } } } }, "gl-xe300": { "release": { "3.217": { "version": "3.217", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (MIFI,X750,E750,XE300,XE300)", "2. Based on QSDK11 (AP1300)" ], "Important bugfix": [ "1. Fix account error for SMTP settings." ] } }, "3.216": { "version": "3.216", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200,AX1800)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Fixed shell injection vulnerabilities." ], "New features": [ "1. Support upgrade to sdk4.x." ], "Important bugfix": [ "1. Fixed SF1200/SFT1200 VPN data leaks.", "2. Fixed MT300N-V2 switch does not reset after the network is restarted.", "3. Fixed X750 wireless initialization exception.", "4. Fixed B2200 WiFi mac error.", "5. Fixed B2200 MESH clients display error.", "6. Fixed B2200 MESH link instability.", "7. Fixed B2200 MESH status LED display error.", "8. Fixed B2200 MESH network failure after the upgrade.", "9. Fixed B2200 MESH sub-router web error message.", "10. Fixed AX1800 USB output is powered off because the manual modem reset.", "11. Fixed Wireguard client reconnect failure in some scenarios.", "12. Fixed Error occurs when the wireguare client name contains spaces." ] } }, "3.215": { "version": "3.215", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)", "3. Based on Siflower SDK (SF1200,SFT1200)" ], "Security": [ "1. Synchronously repair OpenWrt 19.07.10 CVE.(AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)." ], "New feature": [ "1. SF1200/SFT1200 WIFI supports WPA3 Personal Security.", "2. Modem add Verizon,Visible support.", "3. Modem add QFirehose tools.", "4. Modem add SIM puk detection.", "5. Guest wifi supports IPv6." ], "Optimize": [ "1. Optimized the handling mode of Modem Reset.", "2. Optimize AT instructions:AT+COPS=?." ], "Important bugfix": [ "1. Fixed MT1300 using MAC Clone causing wifi to not work properly.", "2. Fixed MT1300 cannot relay Fritzbox's wifi.", "3. Fixed MT1300 HNAT causes VPN data leakage.", "4. Fixed MT300N-V2 unable to change wifi password when using MAC Clone.", "5. Fixed MT300N-V2 cannot relay special characters SSID.", "6. Fixed MT300N-V2 data leak caused by switch bridge during startup.", "7. Fixed MT300N-V2 removes WPA3 because it is not yet supported.", "8. Fixed TxPower batch modification in GoodCloud not working.", "9. Fixed the control logic conflict of traffic statistics switch between router and Goodcloud. ", "10. Fixed WireGuard manual edit allowedip parsing error.", "11. Fixed the WireGuard server whose IP address is DDNS cannot be automatically reconnected after the IP address changes.", "12. Fixed override DNS causes internet access failure in extender mode." ] } }, "3.212": { "version": "3.212", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300,B2200)" ], "New features": [ "1. The router supports the pre-setting of the unique password" ], "Important bugfix": [ "1. Fixed incomplete acquisition of mulllvad commercial configuration.", "2. Fixed wifi password not being able to set 64 bits.", "3. Fixed file sharing directory not being able to select mnt directory when using hub to extend USB storage.", "4. Fix MT1300 Settings can't set the encryption mode to open.", "5. Fixed MT1300 under certain conditions GUEST WIFI will automatically set the encryption mode to Open.", "6. Fix the problem that the N300 cannot detect network cables.", "7. Fixed MT1300 unable to connect to iPhone hotspot.", "8. Fixed MT1300 manual link repeater when band was locked at 2.4g.", "9. Fixed no prompt message on the killSwitch page after VPN policy is enabled on the MV1000.", "10. Fixed MV1000W GUEST network setting failure.", "11. Fixed AR750 5G Repeater crashing when measuring throughput.", "12. Fixed MT1300 cloud platform delivery configuration, transmission power does not take effect.", "13. Fixed AP1300 not being able to connect to cellular using /dev/cdc-wdm0." ], "Other": [ "1. E750 LUCI Remove MCU entry.", "2. MT300n-v2 remove switch tor trigger option.", "3. Luci is installed by default on some models (AR750S,XE300,E750,MT1300,MV1000,B1300,S1300,AP1300,B2200,B1300,S1300)." ] } }, "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } }, "3.203": { "version": "3.203", "release_note": { "OpenWrt Distribution": [ "Based on OpenWrt 19.07.7 (AR150, MIFI, AR300M, USB150, N300, AR750, AR750S, X750, E750, X1200,XE300, MT300N-V2, MT1300, MV1000)", "Based on QSDK11 (B1300, S1300, AP1300)" ], "Security fix": [ "mac80211: backport upstream fixes for FragAttacks(CVE-2020-24586, CVE-2020-24587, CVE-2020-24588, CVE-2020-26139, CVE-2020-26140, CVE-2020-26141, CVE-2020-26142, CVE-2020-26143, CVE-2020-26144, CVE-2020-26145, CVE-2020-26146, CVE-2020-26147)" ], "Important bug fix": [ "Fixed a BUG where the OpenVPN connection status was displayed incorrectly on the E750 LCD", "Fixed XE300 modem manual settings always being overwritten when reboot", "Fixed DNS leakage when using OpenVPN and Wireguard" ] } }, "3.200": { "version": "3.200", "release_note": {} } } }, "gl-xe300-iot": { "release": { "3.211": { "version": "3.211", "release_note": { "System": [ "1. Based on openwrt 19.07.8 (AR150,MIFI,AR300M,USB150,N300,AR750,AR750S,X750,E750,X1200,XE300,MT1300,MT300N-V2,MV1000)", "2. Based on QSDK11 (B1300,S1300,AP1300)" ], "Security": [ "1. Firewall WAN input default setting was changed from Reject to DROP.", "2. Merge the security vulnerability fixed by OpenWRT 19.07.8" ], "New features": [ "1. MAC cloning is supported in Repeater mode. (MT1300,MT300N-V2)" ], "Software Upgrade": [ "1. Upgraded TOR to 4.6.8", "2. Upgraded Stubby to 0.3.0" ], "Optimization": [ "1. The offline client statistics function takes effect after the administrator password is set.", "2. File sharing the mnt directory cannot be shared without external disk.", "3. The modem adds some prompt information when connecting.", "4. Fixed some language translation issues.", "5. After Luci is installed, clicking the link will create a new page.", "6. MV1000 samba supports data folder sharing", "7. Administrator password containing more than 32 characters cannot be submitted." ], "Important bug fix": [ "1. Fixed MT1300 network port negotiation rate probability is only 10MB.", "2. Fixed the data leakage problem caused by the failure of VPN policy after device restart when connecting to some VPNs.", "3. Fixed MT300N-V2 uplink speed limit does not take effect.", "4. Fix X1200 GPS data inaccuracies.", "5. Fixed Repeater scans would not display on the small screen.", "6. Fixed wireGuard failure to reconnect when using NAT acceleration.", "7. Fixed RTTY frequent disconnections.", "8. Fixed IPV6 connection loss after using DHCP for a period of time.", "9. Fixed IPV6 could not specify a prefix length when setting static addresses.", "10. Fixed Luci was successfully installed but not available on unstable networks.", "11. Fixed OpenVPN could not recognize separate key files.", "12. Fixed wireGuard memory leak in the absence of network connection.", "13. Fixed MT300N-V2 WDS not working.", "14. Fix inaccurate client statistics.", "15. Fixed MT300N-V2 GPIO4,GPIO5 can not be used.", "16. Fixed connection failure when the OpenVPN profile contained the COMPRESS LZO option.", "17. Fixed DNS leak when killSwitch is enabled but there is no VPN connection.", "18. Fix PPPOE cannot connect to the PAP/EAP server.", "19. Fixed PPPOE disconnects repeatedly when connecting to servers that do not support IPV6.", "20. Fixed MT300N-V2 on startup Ethernet port probability is not recognized.", "21. Fixed Mt300n-v2 repeated disconnection when VPN POLICY is enabled." ], "Other": [ "1. Supports firmware upgrades to 21.02 of OpenWRT", "2. Supports firmware upgrades to 4.x.x of GL.iNet" ] } } } } }